Impex MSS-1280 manual Diagram

Page 22

STEP 3 (See Diagram 3)

A.) Align the bracket on the Backrest Adjustment Support (#8) in between the two Backrest Supports (#3). Secure it with four M8 x 1 5/8” Allen Bolts (#34), eight Ø 5/8” Washers (#30), and four M8 Aircraft Nuts (#32). Do not tighten the Nuts and Bolts yet.

B.) Insert the Backrest Adjustment Support into the opening on the Main Seat Support (#1). Press or step down on the Backrest Adjustment Lever (#9) to allow the Support to go through.

C.) Attach the bottom side-holes on the two Backrest Supports to the pivot on the Main Seat Support. Secure it with one M10 x 6 ½” Allen Bolt (#39), two Ø ¾” Washers (#31), and one M10 Aircraft Nut (#33).

D.) Securely tighten all Nuts and Bolts in B & C.

E.) Do not over tighten the Nut and Bolt in C.

F.) Make sure the Backrest Supports are able to swivel.

DIAGRAM 3

21

Image 22
Contents Deluxe Smith Machine Table of Contents Before YOU BeginImportant Safety Notice Page Smith Machine Hardware Pack Cage Machine Hardware Pack Smith Machine Assembly Instruction DiagramPage Diagram Pulley bracket on the Weight Sliding Frame faces upward Securely tighten all Nuts and Bolts installed in , ,Diagram Cable Loop Diagram See Diagram 4 & Cable Loop Diagram See Diagram 5 & Cable Loop Diagram See Diagram Smith Machine Exploded Diagram Smith Machine Part List ’tyBench Hardware Pack Bench Hardware Pack Bench Assembly Instruction Diagram Diagram Diagram Diagram Page Bench Parts List Impex INC Info@impex-fitness.com