Impex MSS-1280 manual Bench Assembly Instruction, See Diagram

Page 20

BENCH ASSEMBLY INSTRUCTION

STEP 1 (See Diagram 1)

A.) Attach the Bench Base Frame (#6) to the Rear Stabilizer (#7). Secure the side-holes with two M10 x 4” Carriage Bolts (#41), two Ø ¾” Washers (#31), and two M10 Aircraft Nuts (#33). Secure the top hole with one M10 x 5/8” Allen Bolt (#36) and one Ø ¾” Washer (#31).

B.) Attach the Wheel Set (#25) to the bracket on Rear Stabilizer. Secure it with one M8 x 5 1/8” Allen Bolt (#35), two Ø 5/8” Washers (#30), and one M8 Aircraft Nut (#32)

DIAGRAM 1

19

Image 20
Contents Deluxe Smith Machine Table of Contents Before YOU BeginImportant Safety Notice Page Smith Machine Hardware Pack Cage Machine Hardware Pack Smith Machine Assembly Instruction DiagramPage Diagram Pulley bracket on the Weight Sliding Frame faces upward Securely tighten all Nuts and Bolts installed in , ,Diagram Cable Loop Diagram See Diagram 4 & Cable Loop Diagram See Diagram 5 & Cable Loop Diagram See Diagram Smith Machine Exploded Diagram Smith Machine Part List ’tyBench Hardware Pack Bench Hardware Pack Bench Assembly Instruction Diagram Diagram Diagram Diagram Page Bench Parts List Impex INC Info@impex-fitness.com