Impex MSS-1280 manual Diagram

Page 24

STEP 5 (See Diagram 5)

A.) Attach the Leg Developer (#2) to Main Seat Support (#1). Secure it with one M10 x 3 1/8” Allen Bolt (#38), two Ø ¾” Washers (#31), and one M10 Aircraft Nut (#33).

B.) Insert two Foam Tubes (#10) halfway through the holes on Leg Developer. Push four Foam Rolls (#16) onto the Tubes from both ends. Plug four Foam Roll End Caps (#17) into the ends.

C.) Slide an Olympic Sleeve (#28) on the weight post on Leg Developer. Attach a Spring Clip (#27) to the Sleeve.

DIAGRAM 5

23

Image 24
Contents Deluxe Smith Machine Table of Contents Before YOU BeginImportant Safety Notice Page Smith Machine Hardware Pack Cage Machine Hardware Pack Smith Machine Assembly Instruction DiagramPage Diagram Pulley bracket on the Weight Sliding Frame faces upward Securely tighten all Nuts and Bolts installed in , ,Diagram Cable Loop Diagram See Diagram 4 & Cable Loop Diagram See Diagram 5 & Cable Loop Diagram See Diagram Smith Machine Exploded Diagram Smith Machine Part List ’tyBench Hardware Pack Bench Hardware Pack Bench Assembly Instruction Diagram Diagram Diagram Diagram Page Bench Parts List Impex INC Info@impex-fitness.com