Keys Fitness KF-FT owner manual Slide Weight Shrouds 11 in between the Frame and the Weight

Page 10

Assembly

NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.

STEP 6	Slide Weight Shrouds (11) in between the Frame and the Weight

	Stack as shown above.
	Loosely attach Shroud Brackets (12) onto the Weight Shrouds (11)
	and Left Frame (1) using Bolts M8X15 (58), Bolt M10X100 (53),
	Spring Washers M8 (63), Washers 9X16X1.6 (62), Washers M10 (60),
	and Nylon Nut M10 (64).
	Repeat this step to complete the right side.
	10	10

Image 10

Contents KF-FT Table Of Contents Before You Start Important Safety Information Safety PrecautionsAssembly StepAssembly Pack onto the Guide Rods Slide Left Frame Slip 5 onto Left Slip Tube End Start Slide Weight Shrouds 11 in between the Frame and the Weight Tighten all hardware securely Weight Stack Sticker Placement Parts List KF-FT Parts list Rev aExploded View Warranty Information Keys Fitness PRODUCTS, L.P Lifetime Warranty