Keys Fitness KF-FT owner manual Assembly, Step

Page 5

Assembly

NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.

STEP 1	Connect Left Frame (1) and Right Frame (2) with the two Rear
	Beams (4) using Bolts M10X80 (55), Washers M10 (60), and Nylon
	Nuts M10 (64).

Image 5

Contents KF-FT Table Of Contents Before You Start Safety Precautions Important Safety InformationStep AssemblyAssembly Pack onto the Guide Rods Slide Left Frame Slip 5 onto Left Slip Tube End Start Slide Weight Shrouds 11 in between the Frame and the Weight Tighten all hardware securely Weight Stack Sticker Placement KF-FT Parts list Rev a Parts ListExploded View Keys Fitness PRODUCTS, L.P Lifetime Warranty Warranty Information