EXTENSION HOSE ASSEMBLY
Connect extension hose to the valve assem- bly by aligning "J" slot with raised tab on valve assembly,, Push downward and rotate clockwise to lock in place.
Place the crevice tool in the rectangular slot on back of wand holder,
Connect extension hose to telescopic wand by aligning "J" slot with raised tab on wand. Push hose downward and rotate clockwise to lock in placer
Once extension hose is connected to the telescopic wand, place the wand in the tele- scopic location as shown.
For use of telescopic wand and extension hose see ATTACHMENTS section on page 9
Remove the
| Wand |
( |
|
| IRectangular |
Tab | Slot |
Valve |
|
Wand
LocaHon
Hand#Mete Jr.®
HandI.Mata Jr.®