TROUBLESHOOTING
Review this table to find
I
Disconnect electrical supply before servicing or cleaning the unit. Failure
to do so could result in electrical shock or personal injury.
I | ,l!lJlll | ,111 | i , | qll |
Cleaner won't run,
Poor job of dirt
Cleaner picks up moveable rugs or pushes too hard.
Light won'twork.
Performance indicator is
red,
Air flow restricted with attachment use.
Sound changes.
Dirt Sensor, some models, wtll not work°
1° Unplugged at wall oullet
2.Tripped ctrcuil breaker/blown fuse at household service panel
%Full or clogged dust bin
2.Wrong pile height setting
3.Worn agilalors
4.Clogged nozzle.
5.Clogged hose
6o Hole in hose
7_ Hose not inserted fully
8.Motor protection system activated. 9, Dirty filters.
t0, Suction control slide open 11, Broken or worn beit
I.Wrongpile height setting,
1.Burned out light bulb
1,, Full or clogged dust bin,
2, Dirty filters
3, Clogged airflow passage
4.Certain altachment tools,
1.Attachment use restricts air flow
2.New carpet fuzz clogged air path
1.Dirty optic cells
I.Ptug tn firmly, push ON/Off swilch to ON,.
2o Reset circuit breaker or replace fuse°
1, Empty dust bin,, (page 15) 2o Adjust setting, (page 7).
3_ Take to your nearest Sears Service Center,
4_ Check CLOG REMOVAL, (page tB)
5_ Check for clogs, (page 18)
6_ Take to your nearest Sears Service Center
7. Check hose connection B° Check for clogs, (page 18) 9, Change filters, (page 17) 10° Close slide (page 10),
11o Replace belt (page 20).
1. Adjust setting, (page 7)
I. Change lightbulb, (page I9),
t_ Empty dust bin, (page 15) 2o Change filters, (page 17),
3.Clear clog from airflow passage, (page 18)
4.This is normal Light should go off when tool is removed.
Check ATTACHMENTS, (page 9)
2_ Chock CLOG REMOVAL and clean hose, (page 18)
1. Clean optic ceils, (page 13)
22