OPERATING INSTRUCTIONS
Qulck Release Turn the quick
per Cord release upper cord hook to either side and down to
This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outiet, reverse the plug. If it still does not fit, contact a qualified technician to install the proper outlet. Do not change the plug in any
k
release the
power cord.
way,.
Plug the polarized power cord into a 120 Volt outlet located near the floor,
Release the power cord plug from the power cord and pull the cord off the quick release upper cord hook. Check to be sure the power cord is still locked into the locking notch in the quick release upper cord hook.
Note: To reduce the risk of electric shock, this vacuum cleaner has a polarized plug, one blade is wider than the other,
Personal Injury and Product
Damage Hazard
DO NOT plug in if switch is in the ON position. Personal injury or damage could result.
•DO NOT use outlets above coun- ters, Damage from cord to items in surrounding area could occur.
1"o select a pile height setting:
Turn off cleaner. Select a pile height setting by tilting the cleaner back until front wheels are lifted slightly off the floor as illustrated.
Slide the adjustment lever to the correct setting°
SUGGESTED PILE HEIGHT SETTINGS
You may need to raise the height to make some jobs easier, such as scatter rugs and longer pile carpets Suggested settings are:
HIGH: shag carpet, long pile, plush, scatter rugs.
MED: medium to long pile.
LOW: short to medium pile.
EX LOW: very low pile and bare floors.
Note: When the pile height selection is set to EX LOW the pull forces will be stronger at the agitator, If the push/pull forces are to aggressive or jerky a higher setting should be used,
WARNING
Personal Injury Hazard
To avoid personal injury, DO NOT place hands or feet underneath the unit when changing height setting.
