![Reinstall belt cover and securely snap into place.](/images/new-backgrounds/52179/5217941x1.webp)
Electrical Shock And Personal Injury Hazard
Disconnect electrical supply before servicing or cleaning the unit. Failure to do so could result in elec- trical shock or personal injury from cleaner suddenly starting.
Replace belt whenever a burning rubber smell caused by excessive slippage occurs°
CAUTION
BELT AND MOTOR SHAFT
MAY BE HOT!
Make sure the vacuum has complete- ly cooled prior to replacing belt.
To remove the belt cover, depress the tab and lift off. Remove worn or broken belt.
Place CARPET/FLOOR selector in the BARE FLOOR position,
Loop new belt around the motor shaft. Hold the inside of the belt
against the top of
the large pulley and rotate the
pulley cloc .kwise until the belt is
completely on the pulley.
Note: See PARTS AND FEATURES for belt number_
Rotate the pulley and the motor shaft to ensure that belt is not twisted or pinched°
Tab
Large
PulleyBelt
Reinstall belt cover and securely snap into place.
DO NOT operate cleaner without belt cover in place,
21