Kenmore 116.32735, 116.32734 owner manual Operation, To Clean Dirt Sensor Optics, Hose

Models: 116.32735 116.32734

1 23
Download 23 pages 51.53 Kb
Page 13
Image 13
OPERATION

OPERATION

As you vacuum, the red indicator light will come on and stay on as long as the sensor detects a high concentration of particles passing through the cleaner.

The green light indicatesthat most of the cleaning is complete_

The sensor switch allows you to select the sensitivity of the dirt sensor_ The switch can be set to HI (+) or LO (-) sensitivity.

Set the sensor switch to the H1(+) position when:

Cleaning bare floors,

Cleaning carpet with low pile heighL

Set the sensor switch to the LO (-) position when:

Cleaning heavily soiled areas_

Cleaning carpet with deep pile.

Cleaning new carpets.

Even with

the

 

sensor

switch

in

 

the LO (-)

 

 

Ssrleor

position,

 

the

dirt

Sensitivity ,_

sensor

will

detect

Swltch_

carpet fuzz,

 

 

 

especially

 

on

new

 

carpet,

which

 

 

may

cause

the

 

red

light

to

remain

 

on longer

than

 

expected.

 

 

 

 

WARNING

Electrical Shock And Personal Injury

Hazard

Disconnect electrical supply before

servicing or cleaning the unit. Failure to do so could result in electrical

shock or personal injury from cleaner suddenly starting.

TO CLEAN DIRT SENSOR OPTICS

The dirt sensor optics consist of two optic cells located inside the valve assembly. Occasionally, it may become necessary to clean the two optic cells to assure maximum performance Clean optic cells:

,When the red light stays on continuously.

• When the green tight stays on continuously.

When dirt or dust adheres to the optic ceils.

Whenever the dust cup is cleaned.

\9

Hose

Deep Cleaning

Nozzle Hose

Valve

Assembly

Llft Hem

To clean the sensor, remove deep cleaning nozzle hose at valve assembly by lifting hose straight up_ Remove extension hose from the valve assembly by grasping hose collar, twisting, and pulling straight off.

Lay cleaner back by pressing the handle release pedal (see Releasing the Handle page 8)_

With the hoses removed you can insert a cloth into the valve opening.

Wipe the optic ceils with a soft, dry cloth..

or liquids

as

they

 

Neverhelpusespeedcleanerscanthe ___ln

g

recoating

of

the

 

optic cells and make_

_Valve

it necessary

to clean

 

them much

sooner

 

than normal°

Return cleaner to the upright position. Re- attach nozzle hose and extension hose.

13

Page 13
Image 13
Kenmore 116.32735, 116.32734 owner manual Operation, To Clean Dirt Sensor Optics, Hose