Electrical Shock Hazard
Do not plug into the electrical sup- ply until the assembly is complete° Failure to do so could result in elec- trical shock or injury.
Before assembling vacuum, check the PACKING LIST on the cover of the separate Repair Parts List, Use this list to verify that you have received all the components of your new Kenmore vacuum°
Remove shipping tape from dust bin latch, and belt cover_
HANDLE ASSEMBLY
Remove the two (2) handle screws located in the body
Position the handle as shown in the illustra-
Handle
Screw
t
CAUTION
Do not overtightem
Overtightening could strip the screw holes,
Do not operate the cleaner with-
out the screws in place.
CORD ASSEMBLY
Make sure the quick release upper cord hook is in the upright position. Remove the wire tie from the power cord,
Make sure the power cord is placed into the lock- ing notch on the body as shown, This
helps keep the
power cord out from Power under the vacuum
cleaner agitator,
Quick Release
PowerHook
Lower
Hook
Wrap the power cord around the upper and lower cord hooks and lock the power cord plug onto the power cord.
tion below
When installing the handle, firmly press the handle onto the body. Secure with handle screws provided°
