Graco 222800 Series C important safety instructions Symbols, Equipment Misuse Hazard

Page 3

Symbols

Warning Symbol

WARNING

This symbol alerts you to the possibility of serious injury or death if you do not follow the instructions.

Caution Symbol

CAUTION

This symbol alerts you to the possibility of damage to or destruction of equipment if you do not follow the instructions.

WARNING

INSTRUCTIONS

EQUIPMENT MISUSE HAZARD

Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury.

DThis equipment is for professional use only.

DRead all instruction manuals, tags, and labels before operating the equipment.

DUse the equipment only for its intended purpose. If you are uncertain about usage, call your Graco distributor.

DDo not alter or modify this equipment. Use only genuine Graco parts and accessories.

DCheck equipment daily. Repair or replace worn or damaged parts immediately.

DDo not exceed the maximum working pressure of the lowest rated system component. Refer to the Technical Data on page 26 for the maximum working pressure of this equipment.

DUse fluids and solvents which are compatible with the equipment wetted parts. Refer to the Tech- nical Data section of all equipment manuals. Read the fluid and solvent manufacturer’s warnings.

DDo not kink or overbend hoses or use hoses to pull equipment.

DRoute hoses away from traffic areas, sharp edges, moving parts, and hot surfaces. Do not expose Graco hoses to temperatures above 180_F (82_C) or below –40_F (–40_C).

DWear hearing protection when operating this equipment.

DDo not lift pressurized equipment.

DDo not lift the equipment by the Premier air motor lift ring if the total weight of the equipment ex- ceeds 550 lb (250 kg).

DComply with all applicable local, state, and national fire, electrical, and safety regulations.

308213 3

Image 3
Contents Standard Motor Instructions-Parts ListImportant Safety Instructions Part No , Series CTable of Contents Equipment Misuse Hazard SymbolsSurgical treatment Skin Injection HazardFire and Explosion Hazard Air Line Accessories Installation/OperationSystem Accessories Mounting AccessoriesGrounding Fire and Explosion Hazard Before operating the pump, groundObject being sprayed follow your local code Air Motor Cylinder Troubleshooting the Air MotorPreventive Maintenance Schedule Check ChartUnder the cover 25, F 45 D Service Pressure Relief ProcedureRequired Service Tools Air Motor Shroud Air Valve Replacement106 Detail of Slide Plate Seals104 103 102 1 101 Air Valve ServiceAir Motor Shroud Disassembly, on 107 104Moving Parts Hazard Air Motor Shroud Reassembly, on 308213 107 106 104 102 103 Follow the steps under Air Motor Shroud Disas- sembly on Subplate and Rocker Assemblies33z 24z 30z 32z 29z 31zPiston and Piston Rod Seals 11* z 10z11*z 14 2 See PartsModel 222800 Premier Air Motor, Series C Description Qty10z 32z 30z 31z 24z 33z 27zn 26zn Model 222800 Premier Air Motor, Series C shown Part No Air Valve, Series a 113n 276064 GUIDE, plunger acetal 114n 184370 109 184465110 184485 SPRING, compression 111 184372 CARRIAGE, valve 112n 184484 SPRING, compressionCategory Data Technical DataBottom View DimensionsRevision V, March Graco Standard WarrantyGraco Information Toll Free