JVC CA-MXDVA5 Playing at Random Random Play, Repeat steps 4 to program other tracks you want

English

5 Repeat steps 4 to program other tracks you want.

After 20 tracks are programed, “CLEAR LAST TRACK” is selected.

•If you want to play back the programed tracks, go to step 6.

•If you want to modify the program, see below.

You can cancel the program after play by pressing following buttons:

1.DISC CHANGE, Disc number buttons (DVD1, DVD2, DVD3), 0or 7 (twice) on the unit, or

2.CLEAR on the remote control.

Appears when you can go back to the previous page (track number list).

TRACKS			PROGRAM ORDER
21	22	23	24	10	30	– –	– –
25	26	27	28	– –	– –	– –	– –
29	30	31	32	– –	– –	– –	– –
33	34	35	36	– –	– –	– –	– –
37	38	39	30	– –	– –	– –	– –
CLEAR		LAST	TRACK
CLEAR		ALL	TRACKS
	PRESS PLAY			TO START
RETURN							ENTER

Playing at Random — Random Play

The tracks of the selected disc will play at random.

•Random play cannot be used on a DVD.

•To use Repeat play for Random play, press REPEAT after starting Random play.

Ex.: when selecting track number 30.

6 Press DVD 6.

The tracks are played in the order you have programed.

To stop during play, press 7.

•If you are playing back a VCD or CD, this unit can memorize the end point even when you turn off the unit, and when you start playback again by pressing DVD 6, playback begins from where it has been stopped. (Resume play)

•To stop completely, press 7twice.

To exit from Program play mode while setting the

program, press PLAY MODE or RETURN. (The program you have made is also erased.)

•To exit from Program play mode during or after play, press

CLEAR.

•Ejecting a carrousel will also erase the stored memory.

To modify the program

Before playing, you can modify the program.

To erase the last track: press Cursor ° to select (highlight) “CLEAR LAST TRACK,” then press ENTER.

•Each time you press ENTER, the last programmed track is erased from the program.

To erase all the programed tracks: press Cursor ° to select (highlight) “CLEAR ALL TRACKS,” then press ENTER.

To add tracks in the program before play, simply select the track numbers you want to add by following step 4.

To check the programed contents

After playing, you can check the programed contents by pressing PLAY MODE. The programed contents appear on the TV screen.

If your entry is ignored

You have tried to program a track number that does not exist on the disc. Such entries are ignored.

On the remote control ONLY:

1 Load a disc.

•If the current playing source is not the DVD player, press DVD1, DVD2 or DVD3 on the unit to select the disc you want to play, then 7 before going to the next step.

2 Press PLAY MODE.

The following screen appears on the TV.

•Make sure that “RANDOM” on the TV screen is highlighted. If “PROGRAM” is highlighted, press Cursor 3to highlight “RANDOM.”

PROGRAM			RANDOM
01	02	03	04	– –	– –	– –	– –
05	06	07	08	– –	– –	– –	– –
09	10	11	12	– –	– –	– –	– –
13	14	15	16	– –	– –	– –	– –
17	18	19	20	– –	– –	– –	– –
RETURN							ENTER

The RANDOM indicator also lights up on the display.

To cancel Random play mode, press PLAY MODE or

RETURN.

3 Press ENTER (or DVD 6).

The tracks are played at random. Random play ends when all tracks are played once.

To stop during play, press 7.

• Random play also stops when 0 is pressed.

To exit from Random play mode when finished, press

CLEAR.

If you press ¢or 4

Skips to the next track selected randomly.

– 23 –