Playing Back Tapes
English
Playing Back a Tape
1 Press EJECT (0) for the deck you want to use.
For Deck B
For Deck A
2 Put a cassette in with the exposed part of the tape down.
•You can play back only type I.
When the tape plays to the end, the deck automatically stops if the Reverse Mode is canceled. (See “To play both sides repeatedly — Reverse Mode.”)
To stop during play, press 7.
To operate the other deck, press TAPE A or TAPE B (or TAPE A/B on the remote control), then TAPE 23.
To fast wind to the left or to the right, press 1/ Á
(1or Áon the remote control.)
The tape direction indicator (23) starts flashing quickly on the display.
To remove the cassette, press 0EJECT for deck A or
EJECT 0for deck B.
To play both sides repeatedly — Reverse Mode
Reverse Mode works for both decks at the same time. When it is in use, the tape automatically reverses at the end of a side and the unit starts playing the other side of the tape, and repeats the same process.
To use Reverse Mode, press REVERSE MODE so that the Reverse Mode indicator on the display lights up like —
To cancel Reverse Mode, press the button again so that the Reverse Mode indicator on the display lights up like —
When Reverse Mode is on with cassettes in both decks A and B
After the reverse (2) side of the tape finishes playing, the tape in the other deck starts playing.
3 Close the cassette holder gently.
If you put cassettes in both decks A and B, the last deck which you have put a cassette into is selected.
To operate the other deck, press TAPE A or TAPE B (or TAPE A/B on the remote control).
The use of the
4 Press TAPE 23.
The tape play starts and the tape direction indicator (2 3) starts flashing slowly to indicate the tape running direction.
•Each time you press the button, the tape direction changes.
3: plays the front side.
2: plays the reverse side.
– 36 –