Weider WEBE27331 user manual Tighten all of the M10 Nylon Locknuts Used in steps

Page 13

24. Route the Cable (79) through the Lat Tower Base

24

 

 

(49) and under an 89mm Pulley (65). Attach the

 

 

 

 

32 65

Pulley to the bracket on the Lat Tower Base with

 

 

an M10 x 45mm Bolt (27) and an M10 Nylon

 

 

27

Locknut (32).

 

 

 

79

 

 

 

 

 

49

25. Route the Cable (79) under an 89mm Pulley (65)

25

 

 

and through the Foot Plate (57) as shown. Attach

 

74

43

 

the Pulley to the Foot Plate with an M10 x 45mm

 

32

Bolt (27) and an M10 Nylon Locknut (32).

 

 

74

 

27

 

Attach the Foot Plate (57) to the Lat Tower Base

 

32

 

 

(49) with two M10 x 19mm Bolts (72) and two

 

 

65

 

 

32

M10 Nylon Locknuts (32).

 

 

 

 

 

32

Attach the Foot Plate (57) to the Front Crossbar

18

 

 

(43) with two M10 x 94mm Bolts (18), two M10

 

32

79

 

Washers (74), and two M10 Nylon Locknuts (32).

 

49

 

 

 

Tighten all of the M10 Nylon Locknuts (32)

72

 

 

used in steps 12–18.

 

57

 

 

26. Press two 48mm Round Inner Caps (23) into two

26

 

 

Storage Tubes (70). Screw the Storage Tubes

 

 

 

onto the Left Rear Upright (46). Make sure the

 

 

 

Storage Tubes are fully tightened.

 

 

70

 

 

 

Repeat this step with the other two Storage

 

 

23

 

 

46

Tubes (70) and the Right Rear Upright (not

 

 

 

 

 

shown).

 

 

70

 

 

 

 

 

 

23

27. Press two 32mm Round Inner Caps (68) into the

27

 

 

ends of the Left Weight Rest (80) and the Left

 

 

 

 

 

Safety Spotter (81).

 

68

 

80

Insert the Left Weight Rest (80) and the Left

 

 

 

 

 

Safety Spotter (81) into holes in the left Front

 

 

44

Upright (44) and engage the locking pins around

 

68

81

 

the Upright.

 

 

Repeat this step with the Right Weight Rest

 

 

 

(not shown), the Right Safety Spotter (not

 

 

 

shown), and the right Front Upright (not

 

 

 

shown).

 

 

 

 

13

 

 

Image 13
Contents Model No. WEBE27331 Serial No QUESTIONS?Customer HOT Line Table of Contents Important Precautions Right Side Left Side Before YOU BeginMake Things Easier for Yourself AssemblyTighten the Locknuts yet Locknuts the Wheels must be able to roll easilyPage Locknut the Seat Frame must be able to pivot easily Locknut the Pivot Bracket must be able to pivot easilyLocknut the Leg Lever must be able to pivot easily Locknuts 32. Do not tighten the Locknuts yet Front Crossbar 43 in the same manner Not tighten the Locknuts yetShown. Make sure the Carriage Tubes are fully Tightened Make sure the large ball on the Cable is Indicated position Tighten all of the M10 Nylon Locknuts Used in steps Page Adjusting the Backrest AdjustmentsAdding Weight to the LEG Lever Attaching the LEG Lever or Curl PADAdding Weight to the Weight Rack Weight Rests and Safety SpottersAttaching the LAT BAR Exercise Guidelines Cooling Down Muscle ChartStaying Motivated Date Exercise Weight Sets RepsAerobic Exercise Thursday Aerobic Exercise DatePart Identification CHART-Model No. WEBE27331 R0204A Page Qty Description Part LIST-Model No. WEBE27331Exploded Drawing Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT

WEBE27331 specifications

The Weider WEBE27331 is a versatile and efficient piece of equipment designed for fitness enthusiasts aiming to enhance their strength training experiences. This multifaceted home gym system offers a wide range of features and technologies that cater to both beginners and advanced users.

One of the main features of the Weider WEBE27331 is its robust construction, designed to endure rigorous workouts. The frame is built from durable materials, ensuring stability and longevity during exercises. This solid foundation allows users to perform a range of exercises without the worry of equipment failure, contributing to a safer workout environment.

The machine is equipped with a multi-function press arm, allowing for bench press, shoulder press, and chest fly exercises. This versatility not only supports a full-body workout but also offers the ability to target specific muscle groups effectively. Users can benefit from adjustable resistance levels, which enables them to progress at their own pace as they gain strength.

The Weider WEBE27331 also includes an integrated leg extension and curl station. This feature further expands the range of exercises that can be performed, allowing users to focus on their lower body strength and flexibility. Furthermore, the machine allows for lat pulldown exercises, helping to tone and build muscles in the back and shoulders, providing a comprehensive upper-body workout.

For added comfort, the machine boasts padded seats and backrests, ensuring user support during even the most intense sessions. The ergonomic design promotes better posture and reduces the risk of strain, making workouts not only more effective but also more enjoyable.

In terms of storage, the Weider WEBE27331 is designed with space efficiency in mind. Its compact footprint makes it suitable for home use, as it can fit into smaller spaces while still providing a full array of features.

In conclusion, the Weider WEBE27331 is a comprehensive home gym system that combines durability, versatility, and user comfort. With its array of exercise options and thoughtful design elements, it stands out as an exceptional choice for anyone looking to enhance their fitness journey from the comfort of their own home. Whether for strength training or overall fitness improvement, the WEBE27331 delivers a reliable and effective solution.