Weider WEBE09900 manual Adjusting the Backrest

Page 10

ADJUSTING THE BACKREST

The Backrest (6) can be used in a decline position, a level position, or either of two incline positions. To adjust the Backrest to the decline position, remove the Adjustment Pin (32) and lower the Backrest until it rests directly on the Crossbar (3). Re-insert the Adjustment Pin and secure it with the Pin Clip (43).

To adjust the Backrest (6) to the level position, insert the Adjustment Pin (32) through the top set of holes, and secure it with the Pin Clip (43).

To adjust the Backrest (6) to an incline position, insert the Adjustment Pin (32) as shown through one of the lower two sets of holes in the backrest adjustment tubes. Secure the Adjustment Pin with the Pin Clip (43).

WARNING: When adjusting the position of the seat, make sure that the adjustment pin is inserted through both adjustment tubes.

32

6

 

 

3

 

43

 

Adjustment Tubes

10

Image 10
Contents Model No. WEBE09900 Serial No Customer HOT LineTable of Contents Important Precautions Before You Begin Part Identification Chart Assembly Following Tools not Included are Required for AssemblyTubes and the Backrest must be oriented exactly as shown Page Attaching Weights to the LEG Lever Using the Weight BenchAdjusting the Uprights Adjusting the Backrest Exercise Guidelines Cooling Down Muscle ChartStaying Motivated Aerobic Exercise Exercise Weight Sets RepsDate Thursday Aerobic Exercise DatePart ListÑModel No. WEBE09900 Qty DescriptionExploded DrawingÑModel No. WEBE09900 Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT