PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw- ing is the key number of the part, from the PART LIST on page 14 of this manual. Note: Some small parts may have been
| M8 Washer (29) | |
M10 Washer (30) |
| |
10mm Spacer (38) | M6 Washer (36) | |
M8 x 58mm Bolt (37) | Bolt (31) | |
M8 Nylon Locknut (28) | ||
| ||
| M10 178mmx | |
M10 x 58mm Carriage Bolt (34) |
| |
| M10 Nylon Locknut (27) | |
M10 x 65mm Bolt (33) | M6 x 16mm Screw (32) | |
M10 x 68mm Bolt (40) | M6 x 38mm Screw (35) | |
| 5 |