Xerox FS 5250 IPC instruction manual Explanation to the chart on Automatic Page Orientation

Selected FSL Functions

Xerox FS 5250, User’s Guide

Explanation to the chart on Automatic Page Orientation

Initially, the system will make a request as to the determination of the page orientation. Indicated in the chart as "STO Used?"

The system has 4 different orientation options:

-Portrait

-Landscape

-Computer Output Reduction (COR)

-Device dependent (i.e. the Xerox FS 5250)

If the system has set page orientation to "Device Dependent", the Xerox FS 5250 will determine the page orientation. In the chart indicated as "STO=FFFFh?" set to YES.

NOTE:

If the system commands specifies a specific orientation, it will override the command sequences of the Xerox FS 5250. In the chart indicted as

"USE STO COMMAND".

Y98 Enabled (factory default)

When the Xerox FS 5250 determines the orientation and function Y98 is enabled, the logical page size is compared to the physical page as defined in Y12, value n3. In the chart indicated as "Page Size valid?".

If the logical page fits within the frame of the physical page as defined in Y12,3 (and with Y98 enabled), the page orientation is determined by the relation between the height and the width of the logical page.

If the logical page does not fit within the frame of the physical page, the page orientation will be set to default value as specified in function 10. See the chart.

The orientation may be in landscape, portrait or in COR. If you select COR and the system's print quality is not set to draft, then printing will be made in portrait.

- 47 -