Xerox FS 5250 IPC instruction manual ??% %Y12,n1,n2% &&??space, Value Paper Size, Value Paper Tray

Selected FSL Functions

Xerox FS 5250, User’s Guide

The paper size command has two parameters4. The first parameter (n1) establishes the paper size to be used, the second (n2) tells the interface in which tray the paper type is. If you use the n2 option together with an n1 option, you can connect one paper size to a specific paper tray. You send the command as follows:

&&??% %Y12,<n1>[,n2]% &&??<space>

The command &&??% selects the character "%" as the escape character . The escape character is a signal to the interface that the data stream following is a command stream. The last command in the above line (&&?? <space>) erases the temporary escape character again.

The %Y12 command tells the printer which paper size to use. You have the following options for the n1 parameter:

Value	Paper Size	XES	PCL
1	A4	x	x
2	Legal	x	x
3	Letter	x	x
4	Executive	x	x
5	Letter (Monarch)	x	x
6	Business	x	x
7	International DL	x	x
8	International C5	x	x
10	A3	x	x
11	US Ledger	x	x
99	Use system SPPS or		x
	SHF/SVS values

You do not have to enter an n2 value. If you do not do so, the n1 value will be used for all trays. If you wish the n1 value only to be used for a specific tray, you must enter one of the following values:

Value	Paper Tray
1	Tractor
2	Tray 1
3	Tray 2
4	Manual Feed
5	Envelope Feed
6	Tray 3
7	Tray 4

4The parts of the command that contains a specific instruction to the interface is a parameter. The command 3 = Letter size paper is a parameter.

- 39 -