Xerox FS 5250 IPC instruction manual XES mode selection handles Xdpm and Xppm data streams

Introduction

Xerox FS 5250, User’s Guide

NOTE:

PCL = factory default. "A" position

Note

Operation mode isoutside the B, A, T position. If you wish to operate in PCL mode, donot change the default position of the switch!

XES 1) = "B" position.

Note

To change the driver from default PCL to FSL, you must follow the instructions in the section “Changing the Printer Driver”

If you wish to change to the FSL driver, the printer driver must be selected before you start the operation of the Xerox FS 5250 box. See the section on “Changing the Printer Driver”.

For details as to the selecting of other output data types in XES mode, you are referred to the chapter "Output Data".

1The XES mode selection handles XDPM and XPPM data streams.

- 7 -