Panasonic KX-TDE200, KX-TDE100 manual ICD Group Features-Log-in/Log-out Monitor and Remote Control

1.3 Telephone Features and Operation

• * The status will be as follows: Ready Not Ready

Not Ready Ready Wrap-up Not Ready

•The Log-in/Log-out of a specified group button light shows the current status as follows: Off: Log-in mode

Red on: Log-out mode

•The Wrap-up button alternates the setting of Wrap-up mode, Not Ready mode or Ready mode.

The Wrap-up button light shows the current status as follows: Off: Ready mode

Red on: Not Ready mode

Flashing red: Wrap-up mode

•In Wrap-up mode/Not Ready mode, your extension does not receive calls through any group, even if it belongs to multiple groups.

•The last remaining logged-in extension may not be allowed to log out, depending on system programming.

•The Supervisor extension can control the Log-in/Log-out status of other extensions. For more information, refer to "1.3.39 ICD Group Features—Log-in/Log-out Monitor and Remote Control".

•For information about other ICD group features, refer to "1.3.35 ICD GROUP FEATURES".

Customizing Your Phone

•3.1.4 Customizing the Buttons

Create or edit a Log-in/Log-out button, a Log-in/Log-out of a specified group button or a Wrap-up button.

1.3.39ICD Group Features—Log-in/Log-out Monitor and Remote Control

An extension assigned as a supervisor (supervisor extension) can monitor the Log-in/Log- out status of incoming call distribution (ICD) group members with the lights of corresponding DSS buttons. The supervisor extension can change the Log-in/Log-out status of an extension by pressing the corresponding DSS button.

To perform this operation, the supervisor has to enter incoming call queue monitoring mode first.

Operating Manual

93