Panasonic KX-TDE100, KX-TDE200 manual Colp, Caller ID assigned on the CO line

3.1 Personal Programming

Item	Programming			Selection & Parameter
	Input
					No—Manual (The display keeps
Display Switching Mode			0		showing all of the outside caller's
Would you like the call					information unless you change it to
					the call duration manually.)
duration to be shown	0	3
automatically on the display					Yes—Automatic (The first line
when answering an outside
call?			1		of the display will change to the
					call duration automatically when
					you answer an outside call.)
Display Backlight			0		Yes—On in use
Selection*1
Would you like to turn on	0	4	1		Yes—always On
the display backlight of the
KX-T7633/KX-T7636/IP-			2		No—always Off
PTs?
Self Labeling Display			1		Light
Contrast			2		Little Light
Preferred display contrast	0	5
level from the 4 levels			3		Little Dark
available for Self Labeling
(KX-NT366 only)
			4		Dark
Hot Line	1	1		desired no. (max. 32 digits)
Would you like to dial a			0		Do not use
preset number simply by	1	2
going off-hook?			1		Use
Calling Line Identification			0		No—Allows your number to
Restriction (CLIR)
					be displayed
Should you prevent your
	1	3
number being displayed on
					Yes—Prevent your number
the called party's			1
telephone?					being displayed
Calling/Connected Line			0		Caller ID assigned to your
Identification					extension
Presentation (CLIP/
COLP)	1	4			Caller ID assigned on the CO line
Which number should be			1
					being used
displayed on the called
party's telephone?

166 Operating Manual