Panasonic KX-TDE100, KX-TDE200 manual To dial, Supervisory Features

1.3 Telephone Features and Operation

To set/cancel

PT/SLT/PS

				1	Set
	7	4	0	OR
				0	Cancel	C.Tone
Off-hook.	Enter	740.		Enter 1 to set		On-hook.
				or 0 to cancel.

To dial

PT/SLT/PS

Off-hook.

• To call another party, dial the desired party's phone number before the preprogrammed number is dialed.

•You should assign the intercom line as the seized line when going off-hook. (Preferred Line Assignment—Outgoing)

•It is possible to increase the delay before Hot Line is activated through system programming. This can be useful if you require more time after going off-hook to dial another telephone number or extension number.

Customizing Your Phone

•3.1.2 Personal Programming—Preferred Line Assignment—Outgoing Select the seized line when going off-hook.

1.3.35ICD GROUP FEATURES

An incoming call distribution (ICD) group is a group of extensions assigned through system programming to receive calls (for example, as a call center). The PBX has several features that support using extensions in ICD groups, as follows:

Features	Description
	You can log in to or out of an ICD group, to control whether you receive
Log-in/Log-out	calls from the group.
	(→ 1.3.38 ICD Group Features—Log-in/Log-out)
	An extension assigned as a supervisor (supervisor extension) can
Supervisory Features	monitor and control the status of each member within the ICD group,
	using a 6-line display PT.
	(→ 1.3.41 ICD Group Features—Supervisory)

88

Operating Manual