Panasonic KX-TDE100, KX-TDE200 manual Wireless XDP Parallel Mode, To set

1.3 Telephone Features and Operation

• Whisper OHCA is only available with certain digital proprietary telephones and IP proprietary telephones. In addition, both you and the other party must use supported telephones.

•Whisper OHCA is not available for outside calls; only call waiting tone can be set (refer to "1.3.13 Call Waiting Tone").

•A PDN extension can only receive OHCA or Whisper OHCA from the corresponding SDN

extension. When a call is made from another extension, a PDN extension will receive a call waiting tone. (→ 1.3.49 PDN (Primary Directory Number)/SDN (Secondary Directory Number) Extension)

•For information about answering a waiting call, refer to "1.3.12 CALL WAITING FEATURES".

1.3.77Wireless XDP Parallel Mode

Your PS can be used in parallel with a PT or SLT.

When in this mode, incoming calls to a wired telephone also ring the paired PS.

To set

PS

	4	8	1	extension no.	C.Tone
Press TALK.	Enter	48.	Enter 1.	Enter extension number	Press CANCEL.
				of the paired telephone.

To cancel

PS

	4	8	0	C.Tone
Press TALK.	Enter	48.	Enter 0.	Press CANCEL.

• Some wired telephones are prohibited from using this feature.

• If you go off-hook while your paralleled telephone is in use, the call will switch over to you.

142 Operating Manual