PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw- ing is the key number of the part, from the PART LIST on page 14 of this manual. Note: Some small parts may have been
M6 x 50mm Bolt (23) |
|
|
| M10 Nylon Locknut (33) |
|
|
| M10 Washer (32) |
M8 x 55mm Carriage Bolt (24) |
|
|
M10 x 65mm Bolt (31) | M8 Nylon Locknut (25) | M6 Washer (34) |
| ||
M10 x 75mm Bolt (27) |
|
|
|
| M6 x 16mm Bolt (26) |
M10 x 78mm Bolt (29) |
|
|
|
| 12.5mm Spacer (15) |
M10 x 100mm Bolt (30) |
|
|
M10 x 140mm Bolt (35) |
|
|
| 5 |
|