Part Identification Chart

Refer to the drawings below to identify small parts used in assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST on page 14. Note: Some small parts may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.

M10 Nylon Locknut (11)

10mm Spacer (20)

M10 x 45mm Bolt (38)

M8 x 58mm Bolt (16)

M8 Nylon Locknut (9)

M6 Washer (30)

M10 Washer (6)

M8 Flat Washer (13)

M6 x 64mm Screw (4)

M10 x 22mm Bolt (7)	M6 x 16mm Screw (3)
	M10 x 180mm Bolt (22)

M10 x 58mm Carriage Bolt (8)

M10 x 65mm Bolt (23)

M10 x 68mm Bolt (39)