Weider WESY59531 user manual Cable Diagram, Using the Removable Resistance Bars, Long Cable

Page 16

USING THE REMOVABLE RESISTANCE BARS

The Removable Resistance Bars (36, 67) can be used to exercise apart from the resistance system, as shown in the video or on the exercise guide. To remove a Resistance Bar, pull it out of the Tray (35).

To replace the Removable Resistance Bars (36, 67), slide them into the Tray (35) from the side shown, so that the arrows on the rings point toward the Tray.

Make sure the rings are pushed against the Tray.

67	36
	35
	Rings

CABLE DIAGRAM

The cable diagram shows the proper routing of the Long Cable (80). Use the diagram to make sure that the cable has been assembled correctly. If the cable has not been correctly routed, the resistance system will not function properly and damage may occur. The numbers show the correct route for the cable.

		Long Cable (80)
5
7		4
	6	3
	6
		2
		1

16

Image 16

Contents Model No. WESY59531 Serial No QUESTIONS?Customer HOT Line Table of Contents Important Precautions Dimensions Before YOU BeginAssembly Make Things Easier for YourselfPage Page Knob is aligned with the slot in the Seat Carriage, as shown Page Locate the Long Cable 80. Insert one end Edge of the Pulley Guard is on the side ShownEdge of the Pulley Guard is on the side Shown Onto the hook welded to the bottom of the Bench Rail Adjusting the Seat AdjustmentsAttaching the High Pulleys and LEG Lever Attaching the Accessories Adjusting the ResistanceAdjusting the Backrest Storing the Resistance SystemCable Diagram Using the Removable Resistance BarsMake sure the rings are pushed against the Tray Long CableExercise Guidelines Cooling Down Muscle ChartStaying Motivated Date Exercise Resistance Sets RepsAerobic Exercise Thursday Aerobic Exercise DatePage Part Identification Chart Part LIST-Model No. WESY59531 Qty DescriptionExploded DRAWING-Model No. WESY59531 Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT