Weider WESY59531 user manual Edge of the Pulley Guard is on the side Shown

20. Wrap the Long Cable (80) under a 90mm Pulley

20

(28) as shown. Attach the Pulley and a Pulley

Guard (29) to the Upright (3) with an M10 x

113mm Button Head Bolt (40) and an M10 Nylon

3

Locknut (76). Be sure the flat edge of the

28

Pulley Guard is on the bottom.

40

76

29

80

Flat

Edge

21. Attach a Pulley Housing (94) to the indicated “U”-

21

channel on the 10-Pound Center Resistance Bar

(44) with an M10 x 102mm Button Head Bolt (24),

two Pivot Bushings (74), and an M10 Nylon

44

Locknut (76).

74

74

Wrap the Long Cable (80) around a 90mm Pulley

94

76

(28). Attach the Pulley inside of the Pulley

24

76

Housing (94) with an M10 x 42mm Button Head

Bolt (71) and an M10 Nylon Locknut (76).

71

28

80

22. Wrap the Long Cable (80) around a 90mm Pulley

22

(28). Attach the Pulley and a Pulley Guard (29) to

28

the indicated M10 x 140mm Carriage Bolt (73)

29

with an M10 Nylon Locknut (76). Be sure the flat

edge of the Pulley Guard is on the side

shown.

80

76

Flat

23. Make sure there are no resistance bars under the

Edge

“U”-channels on the 10-Pound Center Resistance

73

Bar (not shown). Have a second person pull on

the Long Cable (80) to create slack in the Cable.

Insert the end of the Long Cable (80) through the

23

welded tube on the indicated end of the Cross

Tube (11) and then through the remaining Swivel

Arm (22). Be sure the Cable is on the indicated

71

side of the welded rod in the Swivel Arm.

22 104

Rod

Insert the Swivel Arm (22) into the welded tube

80

on the Cross Tube (11). Secure the Swivel Arm

with an M4 x 5mm Screw (104).

28

76

Wrap the Long Cable (80) around a 90mm Pulley

11

(28). Attach the Pulley inside of the Swivel Arm

(22) with an M10 x 42mm Button Head Bolt (71)

and an M10 Nylon Locknut (76).

11