Weider WESY39522 user manual 102

29.Wrap the Lat Cable (88) around a 3 1/2” Pulley

(78). Attach the Pulley and a Long Cable Trap (102) to the Top Frame (6) with a 3/8” x 1 3/4” Bolt (93) and a 3/8” Nylon Jamnut (113). Make sure the

Cable Trap is turned to hold the Cable in the groove of the Pulley.

30.Remove the preattached 3 1/2” Pulleys (78) from the Pulley Plates (63).

Wrap the Lat Cable (88) around a 3 1/2” Pulley

(78). Attach the Pulley and a Cable Trap (68) to the second set of holes from the top of the Pulley Plates (63) with a 3/8” x 2” Bolt (100) and a 3/8” Nylon Locknut (87). Make sure the Cable Trap is turned to hold the Cable in the groove of the Pulley.

31.Attach the end of the Lat Cable (88) inside of the Butterfly Top Frame (7) with a 5/16” x 2 1/2” Bolt (59), two 5/16” Washers (90), and a 5/16” Nylon Locknut (86).

32.Locate the Butterfly Cable (69), which is the shortest Cable. Attach the Cable to the Pivot Bracket (70) on the Left Butterfly Arm (25) with a 5/16” x 1” Shoulder Bolt (103) and a 5/16” Nylon Locknut (86).

33.Wrap the Butterfly Cable (69) over a “V”-pulley (55). Attach the Pulley and a Long Cable Trap (102) to the indicated bracket on the Butterfly Upright (3) with a 3/8” x 2 1/2” Bolt (18) and a 3/8” Nylon Locknut (87). Make sure that the Long Cable

Trap is turned to hold the Cable in the groove of the Pulley.

14

29			88	78
		113
				102
				93
				6
30
	100
		68	78
				87
		88
		63
31	86	90
				90
				59
		7
		88
32
		86
				69
			70	103
			25
33
		3
		87	55
			102
				18
		69