44.Wrap the Swivel Low Cable (72) over a 3 1/2” Pulley (78). Attach the Pulley to the Offset Double “U”- bracket (61) with a 3/8” x 1 3/4” Bolt (93) and a 3/8” Nylon Locknut (87).
45.Wrap the Swivel Low Cable (72) under a 3 1/2” Pulley (78). Attach the Pulley to the indicated brack- et on the Long Base (120) with a 3/8” x 1 3/4” Bolt (93) and a 3/8” Nylon Locknut (87).
46.Route the Swivel Low Cable (72) under the indicat- ed stack of Weights (44).
Wrap the Swivel Low Cable (72) under a 3 1/2” Pulley (78). Attach the Pulley to the indicated brack- et on the Long Base (120) with a 3/8” x 1 3/4” Bolt
(93)and a 3/8” Nylon Locknut (87).
47.Wrap the Swivel Low Cable (72) over a 3 1/2” Pulley (78). Attach the Pulley and a Cable Trap (68) between the indicated holes in the Pulley Plates
(63)with a 3/8” x 2” Bolt (100) and a 3/8” Nylon Locknut (87). Make sure that the Cable Trap is turned to hold the Cable in the groove of the Pulley.
48.Wrap the Swivel Low Cable (72) under a 3 1/2” Pulley (78). Attach the Pulley to the indicated brack- et on the Short Base (2) with a 3/8” x 1 3/4” Bolt (93) and a 3/8” Nylon Locknut (87).
17
44 |
|
|
93 |
| 87 |
| 61 |
|
|
| 78 |
|
| 72 |
45 |
|
|
| 72 | |
|
| 78 |
120 |
| 87 |
|
| |
93 |
|
|
46 |
|
|
78 |
| 72 |
|
| |
|
| 87 |
44 |
| 120 |
93 |
|
|
47 |
|
|
100 |
| 63 |
|
| |
68 |
| 87 |
|
| 78 |
|
| 72 |
48 |
|
|
| 78 | |
|
| 72 |
| 87 | 93 |
|
| |
2 |
|
|