Weider WESY49202 user manual Club Weider 16.6ST

Page 21

SEAT ASSEMBLY

47.Press two19mm Round Inner Caps (34) into each Pad Tube (28).

Insert a Pad Tube (28) into the Front Seat Frame (36). Slide a Foam Pad (30) onto each end of the Pad Tube.

Insert the other Pad Tube (28) into the Leg Lever (29). Slide a Foam Pad (30) onto each end of the Pad Tube.

48.Remove the backing from the CLUB WEIDER 16.6ST decal and apply it to the weight sys- tem where shown.

49.Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in ADJUSTMENTS, beginning on the following page.

Before using the weight system, pull each cable a few times to make sure that the cables move smoothly over the pulleys. If one of the cables does not move smoothly, find and correct the problem. IMPORTANT: If the cables are not properly installed, they may be damaged when heavy weight is used. See the CABLE DIAGRAMS on pages 26 and 27 of this manual for proper cable routing. If there is any slack in the cables, you will need to remove it by tightening the cables. See TROUBLE-SHOOTING AND MAINTENANCE on page 25.

47

36

30

34

28

34

30

29

48

CLUB WEIDER 16.6ST

21

Image 21
Contents QUESTIONS? Table of ContentsImportant Precautions Using the weight system. If you have additional Before YOU BeginFor your benefit, read this manual carefully before Assembly Following Tools not Included are Required for AssemblyFrame Assembly Nylon Locknuts yet Do not tighten the Nylon Locknuts yetWeights 25 until is complete Pin grooves are all on the same side Each stack of WeightsDo not tighten the M8 Nylon Locknuts Yet Tighten the Nylon Locknuts yetTube is sitting in the pin groove in the top Weight That the pulleys are on the side shown ARM AssemblyAssemble the Left Arm 47 in the same manner 106 107 ARM Assembly Cable Assembly Long Cable Trap is positioned to hold Cable in place Smoothly Complete the assembly of several pre Attached parts Between the Pulley and the crossbar on Press Frame Locate the Low Cable 23. Route the LowAround the Pulley as shown That the Cable is routed around the PulleyLocate the Military Press Cable 72. Attach Cable Assembly Be inserted from the side shown. Fully tight That the Pulley is on the side shownThat the Cable Trap is positioned to hold Cable in place Indicated side. Note The three holes are for Locate the Leg Press Cable 99. AttachLocate and open the parts bag labeled Seat Assembly Seat AssemblySeat Assembly Club Weider 16.6ST Changing the Weight Setting AdjustmentsAdjusting the LEG Press Plate Attaching and Removing the SeatAttaching the LEG Lever to the LOW Pulley Station Plates Weight Resistance ChartTightening the Cables Troubleshooting and MaintenanceHigh Cable 58 and Low Cable Cable DiagramsHigh Cable Low CableLeg Press Cable Military Press Cable 72 and Leg Press CableR0103A Part Identification CHART-Model No. WESY49202Page 50mm Square Outer Cap Qty Description Part LIST-Model No. WESY49202Exploded Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT

WESY49202 specifications

The Weider WESY49202 is a versatile home gym system designed to bring a complete workout experience to users in the comfort of their own space. This strength training equipment is highly regarded for its solid construction, compact design, and the range of exercises it offers, making it an ideal choice for both beginners and experienced fitness enthusiasts alike.

One of the standout features of the Weider WESY49202 is its adjustable resistance system, which allows users to tailor their workouts to individual fitness levels. The machine typically includes a weight stack that offers a range of resistance options, enabling users to gradually increase the intensity of their workouts as they progress. This adaptability is crucial for promoting muscle growth and overall strength.

The Weider WESY49202 also incorporates multiple workout stations, allowing users to target various muscle groups effectively. With a lat pull-down station, chest press, leg developer, and other workout stations, users can perform a multitude of exercises, such as rows, curls, and extensions. This multifunctionality makes it a comprehensive solution for strength training, eliminating the need for multiple pieces of equipment.

Another notable characteristic is the ergonomic design that prioritizes user comfort and safety. The padded seat and backrest provide necessary support during workouts, while the sturdy frame ensures stability during intense training sessions. Weider’s emphasis on safety is evident, as the equipment is designed to prevent accidents and cater to users of all sizes.

In terms of user experience, the Weider WESY49202 features a compact footprint, making it suitable for home environments where space may be limited. Its sleek design does not compromise functionality, allowing for efficient workouts without the clutter of traditional gym equipment.

Additionally, the durability of the Weider WESY49202 is a significant advantage. The materials used in its construction are engineered to withstand regular use, making it a reliable investment for long-term fitness goals. Overall, the Weider WESY49202 stands out as an all-in-one gym solution, combining versatility, comfort, and durability to help users achieve their fitness aspirations from home.