Weider WESY49202 Following Tools not Included are Required for Assembly, Frame Assembly

Page 4

ASSEMBLY

Before beginning assembly, carefully read the following information and instructions:

•Place all parts of the weight system in a cleared area and remove the packing materials; do not dispose of the packing materials until assembly is completed.

•The assembly is broken into four stages: 1) frame assembly, 2) arm assembly, 3) cable assembly, and 4) seat and backrest assembly. The hard- ware for each stage is packaged separately.

•Wait until you begin each assembly stage to open the parts bag labeled for that assembly stage.

•For help identifying the small parts used in assembly, use the PART IDENTIFICATION

CHART located in the center of this manual. Note: Some small parts may have been pre- attached for shipping. If a part is not in the parts bag, check to see if it has been pre-attached.

•As you assemble the weight system be sure that all parts are oriented as shown in the drawings.

•Tighten all parts as you assemble them, unless instructed to do otherwise.

THE FOLLOWING TOOLS (NOT INCLUDED) ARE REQUIRED FOR ASSEMBLY:

• Two (2) adjustable wrenches

•One (1) standard screwdriver

•One (1) phillips screwdriver

• One (1) rubber mallet

•Lubricant, such as grease or petroleum jelly, and soapy water will also be needed.

Assembly will be more convenient if you have the following tools: A socket set, a set of open-end or closed-end wrenches, or a set of ratchet wrenches.

FRAME ASSEMBLY

1.Before beginning assembly, be sure that you have read and understand the infor- mation in the box above.

Locate and open the parts bag labeled

“FRAME ASSEMBLY.”

Press two 50mm Square Outer Caps (51) onto the Stabilizer (5). Press a 50mm Square Inner Cap (27) into the Base (4).

Insert six M8 x 65mm Carriage Bolts (1) up through the Stabilizer (5). Insert two M8 x 65mm Carriage Bolts up through the Base

(4).

Attach the Base (4) to the Stabilizer (5) with two M8 x 70mm Bolts (11), two M8 Washers (8), and two M8 Nylon Locknuts (3). Do not tighten the Nylon Locknuts yet.

1

 

 

51

11

5

 

 

8

8

 

1

 

 

 

 

3

 

1

4

51

 

 

 

 

 

1

 

 

27

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Table of Contents QUESTIONS?Important Precautions Before YOU Begin Using the weight system. If you have additionalFor your benefit, read this manual carefully before Following Tools not Included are Required for Assembly AssemblyFrame Assembly Do not tighten the Nylon Locknuts yet Nylon Locknuts yetPin grooves are all on the same side Each stack of Weights Weights 25 until is completeDo not tighten the M8 Nylon Locknuts Yet Tighten the Nylon Locknuts yetTube is sitting in the pin groove in the top Weight ARM Assembly That the pulleys are on the side shownAssemble the Left Arm 47 in the same manner 106 107 ARM Assembly Cable Assembly Long Cable Trap is positioned to hold Cable in place Smoothly Complete the assembly of several pre Attached parts Locate the Low Cable 23. Route the Low Between the Pulley and the crossbar on Press FrameAround the Pulley as shown That the Cable is routed around the PulleyLocate the Military Press Cable 72. Attach Cable Assembly That the Pulley is on the side shown Be inserted from the side shown. Fully tightThat the Cable Trap is positioned to hold Cable in place Locate the Leg Press Cable 99. Attach Indicated side. Note The three holes are forSeat Assembly Locate and open the parts bag labeled Seat AssemblySeat Assembly Club Weider 16.6ST Adjustments Changing the Weight SettingAttaching and Removing the Seat Adjusting the LEG Press PlateAttaching the LEG Lever to the LOW Pulley Station Weight Resistance Chart PlatesTroubleshooting and Maintenance Tightening the CablesCable Diagrams High Cable 58 and Low CableHigh Cable Low CableMilitary Press Cable 72 and Leg Press Cable Leg Press CablePart Identification CHART-Model No. WESY49202 R0103APage 50mm Square Outer Cap Part LIST-Model No. WESY49202 Qty DescriptionExploded Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT

WESY49202 specifications

The Weider WESY49202 is a versatile home gym system designed to bring a complete workout experience to users in the comfort of their own space. This strength training equipment is highly regarded for its solid construction, compact design, and the range of exercises it offers, making it an ideal choice for both beginners and experienced fitness enthusiasts alike.

One of the standout features of the Weider WESY49202 is its adjustable resistance system, which allows users to tailor their workouts to individual fitness levels. The machine typically includes a weight stack that offers a range of resistance options, enabling users to gradually increase the intensity of their workouts as they progress. This adaptability is crucial for promoting muscle growth and overall strength.

The Weider WESY49202 also incorporates multiple workout stations, allowing users to target various muscle groups effectively. With a lat pull-down station, chest press, leg developer, and other workout stations, users can perform a multitude of exercises, such as rows, curls, and extensions. This multifunctionality makes it a comprehensive solution for strength training, eliminating the need for multiple pieces of equipment.

Another notable characteristic is the ergonomic design that prioritizes user comfort and safety. The padded seat and backrest provide necessary support during workouts, while the sturdy frame ensures stability during intense training sessions. Weider’s emphasis on safety is evident, as the equipment is designed to prevent accidents and cater to users of all sizes.

In terms of user experience, the Weider WESY49202 features a compact footprint, making it suitable for home environments where space may be limited. Its sleek design does not compromise functionality, allowing for efficient workouts without the clutter of traditional gym equipment.

Additionally, the durability of the Weider WESY49202 is a significant advantage. The materials used in its construction are engineered to withstand regular use, making it a reliable investment for long-term fitness goals. Overall, the Weider WESY49202 stands out as an all-in-one gym solution, combining versatility, comfort, and durability to help users achieve their fitness aspirations from home.
Top Page Image Contents