Weider WESY85290 manual Seat

29. Attach the Long Cable (23) to the Small ÒUÓ-

Bracket (67) with a 1/4Ó Nylon Locknut (2) and a 1/4Ó Flat Washer (10). Do not com- pletely tighten the Nylon Locknut. It should be threaded onto the end of the Cable only a couple of turns, as shown in the inset drawing.

	Attach the Small ÒUÓ-Bracket (67) to the
ASSEMBLYCABLE	Weight Tube (63) with the 5/16Ó x 1 3/4Ó Bolt
	(72) and a 5/16Ó Nylon Locknut (3).

30.Attach the Backrest (41) to the Front Upright (42) with two 1/4Ó x 2 1/2Ó Screws (43) and two 1/4Ó Flat Washers (10).

ASSEMBLY	the center hole in the Seat Plate (37). Attach
	31. Insert the 1/4Ó x 2 1/2Ó Carriage Bolt (38) into
SEAT	the Seat Plate to the Seat (13) with two 1/4Ó x
	1/2Ó Screws (18).

Insert the 1/4Ó x 2 1/2Ó Carriage Bolt (38) into the indicated hole in the Seat Frame (36). Tighten a 1/4Ó Nylon Locknut (2) with a 1/4Ó Flat Washer (10) onto the Carriage Bolt.

Attach the other end of the Seat (13) to the Seat Frame (36) with a 1/4Ó Flat Washer (10) and the 1/4Ó x 2 1/4Ó Screw (24).

14

29
23	67
3	72
	63
10
2
23
10
2
67
30	42
	41
43 10
31	13
	38
36	37
	18
	10
24
	2