Weider WESY85290 manual Nylon Locknuts until the end of this Assembly step

ARM ASSEMBLY

11.	Press a 1 3/4Ó Square Inner Cap (44) into the	11
	Seat Frame (36). Attach a Bumper (73) to the
			Bracket
	Seat Frame with a 1/2Ó Tap Screw (65).			36
	Slide the Seat Frame (36) onto the 5/16Ó x
	2 1/2Ó Carriage Bolts (1) in the Base (4). See		17
	the inset drawing. The bracket on the Seat
	Frame must be behind the Press Frame
	(17). Hand-tighten a 5/16Ó Nylon Locknut (3)	42
	onto each Carriage Bolt. Do not tighten the
	Nylon Locknuts until the end of this
	assembly step.	3
	Attach the Seat Frame (36) to the Front	8		44
	Upright (42) with two 5/16Ó x 2 3/4Ó Bolts (11),
	two 5/16Ó Flat Washers (8), and two 5/16Ó	11
	Nylon Locknuts (3).			73
	Tighten all Nylon Locknuts used in this		36	65
	step now.
				3
		4	1
12.	Attach a Bumper (73) to the Rocker Arm (32)	12
	with a 1/2Ó Tap Screw (65).
	Lubricate a 3/8Ó x 3 1/4Ó Bolt (35). Attach the		73
			65
	Rocker arm (32) to the Base (4) with the 3/8Ó
	x 3 1/4Ó Bolt and a 3/8Ó Nylon Locknut (21).
			32
				21
				4
		LubricateÑ35
13.	Lubricate a 3/8Ó x 2 1/2Ó Bolt (7). Attach the	13
	Leg Lever (29) to the Rocker Arm (32) with
			44
	the 3/8Ó x 2 1/2Ó Bolt and a 3/8Ó Nylon Jam
			32
	Nut (33).			7ÑLubricate
	Press a 1 3/4Ó Square Inner Cap (44) into
	each end of the Leg Lever (29).
			33
				29
				44

9