Weider WESY85100 user manual Following Tools not Included are Required for Assembly

Page 5

ASSEMBLY

Before beginning assembly, carefully read the following information and instructions:

•Place all parts of the home gym system in a cleared area and remove the packing materials; do not dispose of the packing materials until assembly is completed.

•The assembly is divided into four stages: 1) frame assembly, 2) press and butterfly arm assembly, 3) cable and pulley assembly, and 4) seat and backrest assembly. The hardware for each stage is packaged separately.

•Wait until you begin each assembly stage to open that parts bag.

•For help identifying the small parts used in assembly, use the PART IDENTIFICATION

CHART located in the center of this manual. Note: Some small parts may have been pre- attached for shipping. If a part is not in the parts bag, check to see if it has been pre-attached.

•As you assemble the home gym system, be sure that all parts are oriented as shown in the drawings.

•Tighten all parts as you assemble them, unless instructed to do otherwise.

THE FOLLOWING TOOLS (NOT INCLUDED) ARE REQUIRED FOR ASSEMBLY:

•Two (2) adjustable wrenches

•One (1) standard screwdriver

•One (1) phillips screwdriver

•One (1) rubber mallet

•Lubricant, such as grease or petroleum jelly, and soapy water will also be needed.

Assembly will be more convenient if you have the following tools: A socket set, a set of open-end or closed-end wrenches, or a set of ratchet wrenches.

FRAME ASSEMBLY

1.Before beginning assembly, be sure that you have read and understand the infor- mation in the box above.

Press a 2” Square Outer Cap (51) onto each end of the Stabilizer (5). Press a 2” Square Inner Cap (27) into the end of the Base (4).

Insert two 5/16” x 2 3/4” Carriage Bolts (14) up through the Stabilizer (5). Insert two 5/16” x 2 1/2” Carriage Bolts (1) up through the Base (4).

Slide the indicated end of the Base (4) onto the 5/16” x 2 3/4” Carriage Bolts (14) in the Stabilizer (5). Slide the Rear Upright (56) onto the Carriage Bolts. Hand tighten a 5/16” Nylon Locknut (3) onto each Carriage Bolt.

The high side of the bracket on the Rear Upright must be on the side shown. Do not tighten the Nylon Locknuts yet.

1

High Side of

Bracket

56

3

51

5

51

4

14

1

27

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Model No. WESY85100 Serial No QUESTIONS?Customer HOT Line Patent PendingLimited Warranty Table of ContentsImportant Precautions For your benefit, read this manual carefully before Using the Weider 8510 Home Gym System. If youBefore YOU Begin Following Tools not Included are Required for Assembly AssemblyTighten all Nylon Locknuts used in steps 1 through Nylon Locknuts yetIndicated tube in the Base. Be sure Plastic Bushings should fit onto each endThat the pulleys are on the indicated side ARMImportant for step On each Arm. Arm identification is veryArm with the Left Arm 47 refer to step To identify the Right Arm. Be sure thatCable Assembly Cable Assembly Crossbar From other side Inset shows viewCable Assembly Pivot freely Locknut 3. Do not overtighten the NylonLocknut. The Leg Lever must be able to Seat Assembly High Pulley Butterfly Changing the Weight Setting AdjustmentAttaching the LEG Lever to the LOW Pulley Station Weight Resistance ChartAttaching and Removing the Seat Tightening the Cables TROUBLE-SHOOTING and MaintenanceShort Cable Cable DiagramLong Cable 23 TOP View Page Key No. Qty Description Part LIST-Model No. WESY85100R0696A Exploded DRAWING-Model No. WESY85100Ordering Replacement Parts Remove this Part Identification Chart from the Manual

WESY85100 specifications

The Weider WESY85100 is a versatile and compact home gym system designed for users looking to enhance their fitness routine without the need for bulky equipment. This machine is perfect for small spaces, making it an ideal choice for apartment dwellers or anyone seeking a dedicated workout area at home. With its sturdy construction and multiple exercise options, the WESY85100 provides an effective solution for a comprehensive full-body workout.

One of the standout features of the Weider WESY85100 is its adjustable weight resistance system. This allows users to customize their workout intensity according to their fitness level. The machine is equipped with a weight stack that offers smooth transitions between different resistance levels, enabling both beginners and advanced users to find the right challenge for their strength training goals.

The WESY85100 incorporates innovative technologies to enhance the user experience. Its high-tension cables provide increased durability and ensure smooth, consistent movement during workouts. This technology not only enhances safety but also allows for a greater range of motion, making it easier to perform various exercises effectively.

The machine is designed with a variety of exercise stations, allowing users to engage multiple muscle groups in a single session. The Weider WESY85100 includes a chest press, lat pulldown, leg extension, and seated row, among others. This multifunctionality ensures that users can work on their upper and lower body strength, cardio conditioning, and endurance within one comprehensive system.

In addition, the Weider WESY85100 includes a comfortable padded bench that can be adjusted for various positions, promoting proper form and reducing the risk of injury. The ergonomic design of the bench allows users to isolate different muscle groups while providing the necessary support during intense workout sessions.

Overall, the Weider WESY85100 is an excellent choice for anyone looking to establish a home gym. Its combination of adjustable resistance, advanced technology, and multifunctional capabilities creates a powerful workout experience, making it suitable for individuals at any fitness level. Whether you are a beginner aiming to build strength or an experienced athlete seeking a convenient workout solution, the Weider WESY85100 delivers results while accommodating your space and fitness needs.
Top Page Image Contents