Weider WESY85100 user manual Cable Assembly

Page 9

CABLE ASSEMBLY

11.During steps 11 through 25, refer to the CABLE DIAGRAM on page 20 of this manual to verify proper cable routing. Before begin- ning this section, identify the Long Cable (23) and the Short Cable (58) by comparing the lengths and ends of the cables.

IMPORTANT: While assembling the cables, do not overtighten the bolts and nuts securing the pulleys. The pulleys must be able to turn freely.

12.Locate the Long Cable (23). Route the Long Cable around the indicated 3 1/2” Pulley (15) attached to the Top Frame (55). Be sure that the end of the Cable with the ball is on the indicated side of the Pulley and that the Cable is between the Pulley and the hook. Tighten the 3/8” x 3 3/4” Bolt (71) and the 3/8” Nylon Locknut (not shown).

13.Wrap the Long Cable (23) around a “V”-Pulley

(6). Attach the “V”-Pulley and a Long Cable Trap (50) to the indicated bracket on the Front Upright (42) with a 3/8” x 2 1/2” Bolt (7) and a 3/8” Nylon Locknut (21). Be sure that the Long Cable Trap is positioned to hold the Cable in place.

14.Route the Long Cable (23) around the “V”- Pulley (6) on the Left Arm (47). Be sure that the Cable is in the groove of the Pulley and that the Long Cable Trap (50) is posi- tioned to hold the Cable in place. Tighten the 3/8” x 2 1/2” Bolt (7) and the 3/8” Nylon Locknut (not shown).

11

23

58

12

55

23

 

15

Ball 71

Hook

13

 

7

 

 

 

6

50

 

 

 

 

42

23

21

14

6 7 50

47

23

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Model No. WESY85100 Serial No QUESTIONS?Customer HOT Line Patent PendingLimited Warranty Table of ContentsImportant Precautions Using the Weider 8510 Home Gym System. If you Before YOU BeginFor your benefit, read this manual carefully before Following Tools not Included are Required for Assembly AssemblyTighten all Nylon Locknuts used in steps 1 through Nylon Locknuts yetIndicated tube in the Base. Be sure Plastic Bushings should fit onto each endThat the pulleys are on the indicated side ARMImportant for step On each Arm. Arm identification is veryArm with the Left Arm 47 refer to step To identify the Right Arm. Be sure thatCable Assembly Cable Assembly Crossbar From other side Inset shows viewCable Assembly Locknut 3. Do not overtighten the Nylon Locknut. The Leg Lever must be able toPivot freely Seat Assembly High Pulley Butterfly Changing the Weight Setting AdjustmentWeight Resistance Chart Attaching and Removing the SeatAttaching the LEG Lever to the LOW Pulley Station Tightening the Cables TROUBLE-SHOOTING and MaintenanceCable Diagram Long Cable 23 TOP ViewShort Cable Page Key No. Qty Description Part LIST-Model No. WESY85100R0696A Exploded DRAWING-Model No. WESY85100Ordering Replacement Parts Remove this Part Identification Chart from the Manual

WESY85100 specifications

The Weider WESY85100 is a versatile and compact home gym system designed for users looking to enhance their fitness routine without the need for bulky equipment. This machine is perfect for small spaces, making it an ideal choice for apartment dwellers or anyone seeking a dedicated workout area at home. With its sturdy construction and multiple exercise options, the WESY85100 provides an effective solution for a comprehensive full-body workout.

One of the standout features of the Weider WESY85100 is its adjustable weight resistance system. This allows users to customize their workout intensity according to their fitness level. The machine is equipped with a weight stack that offers smooth transitions between different resistance levels, enabling both beginners and advanced users to find the right challenge for their strength training goals.

The WESY85100 incorporates innovative technologies to enhance the user experience. Its high-tension cables provide increased durability and ensure smooth, consistent movement during workouts. This technology not only enhances safety but also allows for a greater range of motion, making it easier to perform various exercises effectively.

The machine is designed with a variety of exercise stations, allowing users to engage multiple muscle groups in a single session. The Weider WESY85100 includes a chest press, lat pulldown, leg extension, and seated row, among others. This multifunctionality ensures that users can work on their upper and lower body strength, cardio conditioning, and endurance within one comprehensive system.

In addition, the Weider WESY85100 includes a comfortable padded bench that can be adjusted for various positions, promoting proper form and reducing the risk of injury. The ergonomic design of the bench allows users to isolate different muscle groups while providing the necessary support during intense workout sessions.

Overall, the Weider WESY85100 is an excellent choice for anyone looking to establish a home gym. Its combination of adjustable resistance, advanced technology, and multifunctional capabilities creates a powerful workout experience, making it suitable for individuals at any fitness level. Whether you are a beginner aiming to build strength or an experienced athlete seeking a convenient workout solution, the Weider WESY85100 delivers results while accommodating your space and fitness needs.
Top Page Image Contents