Weider 831.1591 user manual Part Identification Chart

PART IDENTIFICATION CHART

Refer to the drawings below to identifysmall parts used in assembly. The number in parentheses by each draw- ing is the key number of the part, from the PART LIST on page 14 of this manual. Note: Some small parts may

have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.

M1O x 4Omm Bolt (21)

M10 Nylon Locknut (19)

M10 Washer (18)

M10 x 19mm Bolt (22)

M10 x 62mm Bolt (16) M10 x 68mm Bolt (23)

5