ASSEMBLY
Make Things Easier for Yourself
This manual is designed tqensure that the exercise rack canbe assembled successfully
by anyone. Most people f ndlthat, by setting aside plenty of time, asS_e_bywi go s_oth y.
Before beginning assembly, carefully read the following Information and Instructions:
•Assembly requires two people.
•For help identifying small parts, use the PART IDENTIFICATION CHART on page 5.
•Tighten all parts as you assemble them, unless instructed to do otherwise.
•As you assemble the exercise rack, make sure all parts are oriented as shown in the drawings.
Press an Endcap (11) onto each end of the two Stabilizers (5). Slide a Handgrip (12) onto the handle of each Stabilizer.
2.Attach an Upright Base (3) to a Stabilizer (5) with two M10 x 19mm Bolts (22) and two M10 Washers (18). Do not tighten the Bolts yet.
Attach the other Upright Base (3) to the other Stabilizer (5) in the same manner.
•Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
The following tools (not included) are required for assembly:
•Two adjustable wrenches
•One rubber mallet
•One standard screwdriver
•One Phillips screwdriver
•A small amount of soapy water.
Assembly will be more convenient if you have a socket set, a set of
1
11
12
11
11
2
22
18