Model No. 831.150741
QUESTIONS?
If you find that:
*you need help assembling or operating the WELDER" PRO 800
•a part is missing
•or you need to schedule repair service
call our
REPLACEMENT
PARTS
If parts become wdm and need to be replaced, call the following toll- free number
The model number and serial number of your WELDER" PRO 800 are listed on a decal attached to the frame. See the front cover of this manual to find the location of the decal.
All replacement parts are available for immediate purchase or
special order when you visit your nearest SEARS Service
Center. To request service or to order parts by telephone, call the
When requesting help or service, or ordering parts, please be prepared to provide the following information:
•The MODEL NUMBER of the product (831.150741)
•The NAME of the product (WELDER ® PRO 800 Weight Bench)
•The PART NUMBER of the PART (see the PART LIST and the EXPLODED DRAWING on pages 14 and 15 of this manual)
•The DESCRIPTION of the PART (see the PART LIST and the EXPLODED DRAWING on pages 14 and 15 of this manual).
1-800-FON-PART
SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179
For 90 days from the date of purchase, if failure occurs due to defect in matedal or workmanship in this SEARS WEIGHT BENCH EXERCISER, contact the nearest SEARS Service Center throughout the United States and SEARS will repair or replace the WEIGHT BENCH EXERCISER, free of charge.
This warranty does not apply when the WEIGHT BENCH EXERCISER is used commercially or for rental purposes.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
SEARS, ROEBUCK AND CO., DEPT. 817WA, HOFFMAN ESTATES, IL 60179
Part No. 169249 R0800A | Printed in China © 2000 Sears, Roebuck and Co. |