AFTER USE / STORAGE
1.Press the steam button, so that it returns to the “Dry” position.
2.Set the temperature control to “OFF”.
5. Retract the electrical cord.
3.Remove the tank and drain any remaining water. After draining the water, reinstall
the tank onto the iron.
4. Remove the electrical plug from the electrical outlet.
•Grasp the electrical cord
by the plug when unplugging it.
•To retract the electrical cord, pull it out slightly, then release it.
•If the cord stops before retracting completely, pull out the cord slightly, straighten out any twisted parts, then slowly release it again.
6.Place the case back over the iron.
•Be sure that both case latches are closed securely prior to storage.
•Please be aware that the case will only fit correctly in one direction. If the case is placed sideways over the iron, it may become deformed due to the iron’s heat.
10