CONTROLS
Steam Button
•Leave button up for steam, press down for a dry iron.
Burst of Steam Button
•Pressing this button will discharge a powerful shot of steam.
Temperature Indicator Lights
•The selected light will continue flashing until the preset temperature is reached.
•Once the preset temperature is reached, the light will stop flashing and remain illuminated.
•If the iron is not on the cradle, these lights will not be illuminated.
Off/Auto Off Light
The “OFF / AUTO OFF” light will flash when:
•The electrical plug is inserted into the electrical outlet.
•The temperature is set to “OFF”.
•The
Spray Button
• Pressing this button will discharge a mist of water from the spray nozzle.
Ready Light
• This light will illuminate when the appropriate operating temperature is reached.
• During ironing, the ready light will begin to flash whenever the temperature of the iron starts to decrease. If the temperature continues to decrease, the light will eventually turn off. When the light begins to flash, place the iron back on the cradle for reheating. Once the soleplate heats up to the appropriate operating temperature, the light will again illuminate.
Temperature Control Button
Press this button firmly, once the iron |
|
|
|
has been placed on the cradle. |
| 2 | |
• Each time this button is pressed, the |
| ||
|
|
| |
flashing light will cycle to the next | 1 | 3 | |
temperature indicator, in the order | |||
shown by the arrows in the diagram. |
|
|
|
• In order to avoid a malfunction |
| 4 | |
caused by accidental button contact, |
|
|
|
the iron has been designed so that |
|
|
|
the activation of the temperature |
|
|
|
control button requires additional |
|
|
|
pressure. |
|
|
|
•If the iron is left on the cradle with the power still on, it will automatically shut off after approximately 10 minutes. The “Auto off” light will illuminate.
3