Steam Clean
Use this option for heavily soiled loads that need improved stain treatment or loads with multiple types of stains. When Steam Clean is selected, the water temperature of the selected
wash cycle is automatically set to warm. The water will then be slowly heated to the temperature selected, along with steam, to aid in stain removal This option will provide
optimal removal of organic stains such as blood and
in the same cycle. This option is available on the following cycles: Normal/Casual, Heavy Duty, and Whitest Whites.
Extra Rinse
A second rinse can be used to aid in the removal of detergent or bleach residue from garments. This option provides an additional rinse with the same water temperature as the normal rinse. This is the default rinse setting for the Whitest Whites cycle.
Preset cycle settings of Soil I.evel (cycle time), Wash Temperature, and Spin Speed can be changed. You can change these settings by using modifiers. Modifiers can be changed before or during the cycle until that part of the cycle starts. Not all modifiers are available with all cycles and options.
|
|
|
|
| [m | extra high |
|
|
|
| U | sanitize | [m | high |
|
[U | heavy |
| U | ATC hot | _ | medium |
|
g | normal |
| B | ATCwarm | _ | low |
|
| light |
| _ | cold | _ | no spin |
|
| soilievel | } | [ | washtemp | [ | spinspeed | } |
modifiers
To change Soil I.evel (cycle time), select the SOIl. I.EVEI. button until the desired setting illuminates.
To change the water temperature, select the WASH TEMP button until the desired setting illuminates.
To change the spin speed, select the SPIN SPEED button until the desired setting illuminates.
Water Temp
Select a water temperature based on the type of load you are washing. Use the warmest wash water safe for fabrics. Follow garment label instructions.
Warm rinses leave the loads drier than cold rinses. Warm rinses increase wrinkling. In cold climates, a warm rinse makes the load more comfortable to handle. Cold rinses save energy.
•Cycles certified by NSF International, an independent, third party testing and certification
organization are those with the sanitize temperature selection available. The certification verified that these cycles reduce 99.9% of bacteria typically found on clothing, bedding, and towels. There is no carryover of bacteria between loads after the cycle is complete.
|
|
|
|
|
|
|
|
|
| Certified | to | Sanitize |
|
|
|
|
|
|
| |
• | The | Sanitize | water | temperature | provides | an | extra | high |
| temperature | wash | to remove | ||||||||
| 99.9% | of | certain | bacteria. | It is | recommended | that | you |
| set your hot | water | heater | to | |||||||
| 120°F | (49°C) | to | ensure | proper | performance | during | this |
| cycle. |
|
|
| |||||||
• | The | Sanitize water temperature is extremely hot. Please check garment care labels to | ||||||||||||||||||
| avoid | garment | damage. |
|
|
|
|
|
|
|
|
|
|
|
| ! | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In | wash | water | temperatures | colder than 60°F (15.6°C), detergents do not dissolve well. | ||||||||||||||||
Soils may | be | difficult | to | remove. Only cycles with sanitize |
| wash temperature | selected | ....... | ||||||||||||
have been designed to meet the requirements of NSF Protocol P172 for Sanitizing |
| |||||||||||||||||||
Efficacy. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| :::::::,,, | |
Wash | Water | Temperature | Suggested | Fabrics |
|
|
|
|
|
|
|
|
| |||||||
Wash | Water | Temperature |
|
|
|
| Suggested | Fabrics |
|
|
| |||||||||
SANITIZE |
|
|
|
|
|
|
|
|
| Sturdy | colorfast | fabrics |
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
| Heavy | soils |
|
|
|
|
|
| ||
HOT |
|
|
|
|
|
|
|
|
|
| Sturdy | colorfast | fabrics |
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
| Whites | and | pastels |
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
| Heavy | soils |
|
|
|
|
|
| ||
WARM |
|
|
|
|
|
|
|
|
| Bright | colors |
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
| Moderate | to | light | soils |
|
|
| |||
COLD |
|
|
|
|
|
|
|
|
|
| Colors | that | bleed | or fade |
|
|
| |||
|
|
|
|
|
|
|
|
|
|
| Light | soils |
|
|
|
|
|
|
| |
In wash water | temperatures | colder | than 60°F | (15.6°C), detergents do not dissolve weft. |
| |||||||||||||||
Soils may be difficult to remove. |
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||
Automatic | Temperature |
| Control |
|
|
|
|
|
|
|
|
|
|
|
| |||||
The automatic | temperature control | electronically | senses and maintains a uniform water |
| ||||||||||||||||
temperature. |
| Automatic | temperature control regulates incoming hot and cold water. |
| ||||||||||||||||
Automatic | temperature | control | is automatically |
| turned On when a cycle is selected. |
|
See "Preset Cycle Settings" in Cycles.
•Automatic temperature control works for all wash and rinse temperature settings.