Installation Instructions

•This washer is equipped with a power supply cord having a 3 prong grounding plug.

•To minimize possible shock hazard, the cord must be plugged into a mating, 3 prong,

grounding-type outlet, grounded in accordance with local codes and ordinances. If a

mating outlet is not available, it is the personal responsibility and obligation of the customer to have the properly grounded outlet installed by a qualified electrician.

•If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate.

•Do not ground to a gas pipe.

•Check with a qualified electrician if you are not sure the washer is properly grounded.

•Do not have a fuse in the neutral or ground circuit.

GROUNDING iNSTRUCTiONS

For a grounded, cord=connected washer:

This washer must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electrical shock by providing a path of least resistance for electric current. This washer is equipped with a cord having an equipment-groundingconductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

WARNING: improper connection of the equipment- grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded.

Do not modify the plug provided with the appliance - if it will

not fit the outlet, have a proper outlet installed by a qualified electrician.

For a permanently connected washer:

This washer must be connected to a grounded metal, permanent wiring system, or an equipment grounding conductor must be run with the circuit conductors and

connected to the equipment-grounding terminal or lead on the appliance.

Excessive Weight Hazard

Use two or more people to move and install washer.

Failure to do so can result in back or other injury.

IMPORTANT: Position the washer so that the rear of the washer is within approximately 3 ff (900 mm) of its final location.

There are 4 bolts in the rear panel of the washer that support the suspension system during

transportation. These bolts also retain the power cord inside the washer until the bolts are removed.

....6

HHZ'

1.Using a 13 mm wrench, loosen each of the bolts.

2.Once the bolt is loose, move it to the center of the hole and completely pull out the bolt, including the plastic spacer covering the bolt.

3.Once all 4 bolts are removed, discard bolt and spacers. Then pull the power cord through the opening of the rear pane[ and dose the hole with the attached cap.

4.Close the bolt holes with the 4 transport bolt hole plugs.

NOTE: If the washer is to be transported at a later date, ca[[ your local service center. To avoid

suspension and structural damage to your washer, it must be properly set up for relocation by a certified technician.

W10176966C specifications

The Maytag W10176966C is a highly efficient and versatile appliance designed to enhance the functionality of your home. As part of Maytag’s commitment to reliability and performance, this model stands out for its innovative features, cutting-edge technologies, and robust design.

One of the main features of the Maytag W10176966C is its durable construction. Built with high-quality materials, this appliance is designed to withstand the rigors of daily use while maintaining its performance over time. The stainless steel finish not only gives it a sleek and modern look, but it also resists smudges and fingerprints, making it easy to clean and maintain.

The W10176966C is equipped with advanced features that contribute to its efficiency. For instance, it has a powerful motor that ensures optimal cleaning performance, with various speeds to tackle different tasks. This allows users to customize their cleaning experience based on the type of load they are handling, whether it be delicate fabrics or heavily soiled items.

Energy efficiency is also a key characteristic of the Maytag W10176966C. This model is designed to consume less water and energy without compromising cleaning power. It is compliant with ENERGY STAR standards, which means it meets strict energy efficiency guidelines set by the EPA, helping homeowners save on utility bills while also being environmentally friendly.

Additionally, the appliance incorporates innovative technologies such as load sensing, which automatically adjusts the cycle duration and resources based on the size and soil level of each load. This results in a more efficient wash that ensures optimal resource use, reducing waste and improving overall performance.

Users will also appreciate the intuitive control panel, which makes it easy to select settings and monitor progress. The variety of cycle options ensures that there is a suitable choice for every cleaning need, and the delayed start feature offers added convenience, allowing users to schedule washing times according to their preference.

Overall, the Maytag W10176966C combines durability, efficiency, and advanced technologies to provide a superior cleaning experience. With its focus on reliability and user-friendly features, it is an excellent addition to any home, reflecting Maytag’s long-standing tradition of quality and performance. This model is ideal for families and individuals seeking a dependable partner for their laundry needs.