Maytag W10176966C Was the wash temperature too low?, Did you choose the Whitest Whites cycle?

Page 26

Was the wash temperature too low?

Use hot or warm washes if safe for the load. Make sure your hot water system is adequate to provide a hot water wash.

Did you use enough detergent, or do you have hard water?

Use rnore detergent for washing heavy soils in cold or hard water.

Cycle too long

Did you choose the Whitest Whites cycle?

The heater will be activated to provide maximum cleaning performance. Additional time will be added to the regular cycle to heat the water. This additional time will depend on the load size and the hot water inlet temperature.

Is "SUD" shown in the display?

Excessive sudsing has been detected and a suds routine has been started to destroy excessive suds. This routine will add time to the original cycle.

Before

calling for

assistance

or

service,

please check

"Troubleshooting."

It may save you the

cost of

a service

ca[[. If you

still

need

help, follow the

instructions

below.

 

When calling, please know the purchase date and the complete mode[ and serial number of your appliance. This information will help us to better respond to your request.

If you need replacement parts

If you need to order replacernent parts, we recornrnend that you use only factory specified parts. Factory specified parts will fit right and work right because they are made with the same precision used to build every new Maytag _kappliance.

To locate factory specified parts in your area, ca[[ the Maytag Services, I.I.C Customer Assistance telephone number, or your nearest designated service center.

Call the Maytag Services, I.I.C Customer Assistance toll free: 1-800-688-9900. Our consultants provide assistance with:

•Features and specifications on our full line of appliances.

•Installation information.

•Use and maintenance procedures.

•Accessory and repair parts sales.

•Specialized customer assistance (Spanish speaking, hearing impaired, limited vision, etc.).

•Referrals to local dealers, repair parts distributors, and service companies. Maytag _k_ appliances designated service technicians are trained to fulfill the product warranty and provide after-warranty service, anywhere in the United States.

To locate the Maytag <"appliances designated service company in your area, you can also look in your telephone directory Yellow Pages.

Did you wash a large load using the Quick Wash cycle?

The Quick Wash cycle is designed for smaller load sizes (2-3 iterns of lightly soiled garments). If larger loads are washed using this cycle, wash time will be increased.

Did you wash a large load using a gentle cycle?

When using the Delicate and Handwash cycles, you should wash small loads. This ensures a gentle wash for your garments without increasing cycle times.

Did the load cause imbalance?

When too much imbalance occurs, an imbalance routine will start to redistribute the load. During the imbalance routine, the time displayed may pause until this activity is complete, then resume with the remainder of the cycle.

Door locked at end of wash cycle

•Did all of the water drain out of the washer during the spin?

Select I)RAIN & SPIN to rernove any water rernaining in the washer. The washer door will unlock at the end of the drain.

For further assistance

If you need further assistance, you can write to Maytag _ appliances with any questions or concerns at:

Maytag Services, I.I_C

ATTN: CAIR _ Center

P.O. Box 2370

Cleveland, TN 37320-2370

Please include a daytime phone number in your correspondence.

Call the Whirlpool Canada I_P Customer experience Centre toll free: 1-800-807-6777.

Our consultants provide assistance with:

•Features and specifications on our full line of appliances.

•Use and maintenance procedures.

•Accessory and repair parts sales.

•Referrals to local dealers, repair parts distributors, and service companies. Whirlpool Canada I_Pdesignated service technicians are trained to fulfill the product warranty and provide after-warranty service, anywhere in Canada.

For further assistance

If you need further assistance, you can write to Whirlpool Canada I.P with any questions or concerns at:

Customer eXperience Centre

Whirlpool Canada I_P

1901 Minnesota Court

Mississauga, Ontario 1_5N 3A7

Please include a daytime phone number in your correspondence.

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Performanceseries Table of Contents Table DES Matieres Your safety and the safety of others are very important Including InstallationRequirements Do not add gasolineParts supplied PedestalYou will need Washer DimensionsCompanion appliance spacing should also be considered Required spacing Dimensions shown are for the recommended spacingRecessed or closet installation Washer on pedestal 76ramRecommended installation spacing for cabinet installation Electrical Shock Hazard Plug into a grounded 3 prong outletFor a grounded, cord=connected washer Installation InstructionsExcessive Weight Hazard For a permanently connected washerRemove drain hose from washer cabinet Laundry tub drain or standpipe drainAdapter Do not remove ground prongDo not Use an Do notCommercial Quality Stainless Steel Drum Steam CleanElectronic Controls For All Wash Cycles Washer USEFirst Wash Cycle Without Laundry To fill dispenser compartments To begin the wash cycle immediately Select START/PAUSEChoosing the Right Detergent Fabric softener compartment Main wash compartmentChlorine bleach compartment LQUiDMAINWASHVDoor Locked When the status light illuminates, the door is lockedSanitize Clean Washer with Affresh TM Signal On/Off Normal Washer SoundsExtra Rinse TemperatureFabrics Wash Water Temperature Suggested Laundry Tips Cleaning the door seal Wear rubber gloves when cleaning for prolonged periodsAdd one AFFRESHrMwasher cleaner tablet to the washer drum Begin procedureUsing the AEERESH1Mwasher cleaner Recommended To use washer again TroubleshootingReinstalling the washer Washer wont drain or spin Washer wont startWasher wont fill, wash, or rinse Is the washer level?Did you sort properly? Washer odorLoad too wet Load is wrinkledDid you wash a large load using the Quick Wash cycle? Was the wash temperature too low?If you need replacement parts Did you wash a large load using a gentle cycle?Maytag Laundry Warranty Limited WarrantySecurite DE LA Laveuse Suivez pas immdiatement les instructionsDestin6 & Iutilisateur Laisser desJouer sur ou a Iinterieur de la Si vous avez Vous devrez Acheter Outils ncessaires pour IinstallationOutils ncessaires pour raccorder les tuyaux darrive deau PidestalDimensions de la laveuse Ensemble de superposition111-31y241--T Es dimensions indiqu6es sont pour Iespacement recommand6Installation dans un encastrement ou placard Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Toute Ieausest-elle 6coul6e de la laveuse durant Iessorage? Envisager Iutilisation dund6tergent liquideLinge froiss Si vous avez besoin de pices de rechange Pour plus dassistanceGarantielimitie W10176966C 0208

W10176966C specifications

The Maytag W10176966C is a highly efficient and versatile appliance designed to enhance the functionality of your home. As part of Maytag’s commitment to reliability and performance, this model stands out for its innovative features, cutting-edge technologies, and robust design.

One of the main features of the Maytag W10176966C is its durable construction. Built with high-quality materials, this appliance is designed to withstand the rigors of daily use while maintaining its performance over time. The stainless steel finish not only gives it a sleek and modern look, but it also resists smudges and fingerprints, making it easy to clean and maintain.

The W10176966C is equipped with advanced features that contribute to its efficiency. For instance, it has a powerful motor that ensures optimal cleaning performance, with various speeds to tackle different tasks. This allows users to customize their cleaning experience based on the type of load they are handling, whether it be delicate fabrics or heavily soiled items.

Energy efficiency is also a key characteristic of the Maytag W10176966C. This model is designed to consume less water and energy without compromising cleaning power. It is compliant with ENERGY STAR standards, which means it meets strict energy efficiency guidelines set by the EPA, helping homeowners save on utility bills while also being environmentally friendly.

Additionally, the appliance incorporates innovative technologies such as load sensing, which automatically adjusts the cycle duration and resources based on the size and soil level of each load. This results in a more efficient wash that ensures optimal resource use, reducing waste and improving overall performance.

Users will also appreciate the intuitive control panel, which makes it easy to select settings and monitor progress. The variety of cycle options ensures that there is a suitable choice for every cleaning need, and the delayed start feature offers added convenience, allowing users to schedule washing times according to their preference.

Overall, the Maytag W10176966C combines durability, efficiency, and advanced technologies to provide a superior cleaning experience. With its focus on reliability and user-friendly features, it is an excellent addition to any home, reflecting Maytag’s long-standing tradition of quality and performance. This model is ideal for families and individuals seeking a dependable partner for their laundry needs.
Top Page Image Contents