Danby DTT420 owner manual Spin, Identifications DES Pièces

IDENTIFICATIONS DES PIÈCES

1.	arrivée d’eau	8.	couvercle intérieur de l’essoreuse	15.	grille de débordement
2.	minuterie de lavage	9.	cordon d’alimentation	16.	ondulateur (avec filtre à charpie)
3.	commande de lavage	10.	cuve de l’essoreuse	17.	cuve de lavage
4.	grille de drain	11.	attache boyau	18.	couvercle de la cuve de lavage
5.	commande de drain	12.	panneau de devant
6.	couvercle de l’essoreuse	13.	boyau de débordement
7.	minuterie de l’essoreuse	14.	espace pour frottage-lavage

Filtre à charpie

E) Spin

1.	Putting in the clothes	Safety Cover
	Put the wet clothes into the spin-tub
	Distribute the clothes in the tub being sure that
	they are well balanced.
	Put the safety cover properly on top of the
	clothes	Correct	Incorrect
2.	Closing the lids
	Close the spin-tub lid and inner lid		Spin-tub
	The machine will not spin if the spin-tub lid is
			lid
	open	Inner lid
3.	Spin timer
	Turn the timer clockwise until you reach the
	desired spin time position

Spin Time
Type of Fabric	Spin Time
Clothes that wrinkle easy	1 - 3 min.
(synthetics, fibers, delicate materials)
Clothes that do not wrinkle easy	3 - 5 min.
(workclothes, sheets, underwear)

Unbalance

If there is any abnormal vibration during spinning, open the lids to stop the spin-tub and rearrange the clothes evenly.

Simultaneous Drain

If the drainage from the wash-tub and spin-tub occur simultaneously, the drainage from spin-tub will be obstructed and there may be a malfunction. Therefore, if you need to drain the wash-tub while spinning, be sure to drain the wash-tub after at least one minute’s spinning.

16 9