Hotpoint NLL113 operating instructions Replacement Parts, Reversing the Dryer Door Swing

Page 17

Replacement Parts

Safety Instructions

If replacement parts are needed for your dryer, visit Hotpoint.com, or call GE Parts and Accessories

at 800.626.2002 or contact an authorized parts supplier.

WARNING: Destroy the carton and plastic bags after the dryer is unpacked. Children might use them for play. Cartons covered with rugs, bedspreads or plastic sheets can become airtight chambers causing suffocation. Place all materials in a garbage container or make materials inaccessible

to children.

WARNING: The instructions in the manual and all other literature included with this dryer are not meant to cover every possible condition and situation that may occur. Good safe practice and caution MUST be applied when installing, operating and maintaining any appliance.

Operating Instructions

Reversing the Dryer Door Swing

 

Open the dryer door. Remove the 4 hinge hole

 

1

 

plugs or screws from the left side of door

 

 

 

 

opening. Place nearby for future installation.

 

 

NOTE: You may need a plastic knife to help pull

 

 

out the plugs. Be careful not to scratch the paint.

 

 

Remove the four screws that secure the door

 

2

 

hinges to the dryer front panel. NOTE: Remove

 

 

 

 

1 screw from each of the 2 hinges first. Hold the

 

 

door firmly before removing the last 2 screws.

 

 

Rotate the door 180° and reinstall the door

 

3

Remove 4 screws—one from each hinge first

hinges to the dryer front panel with the 4 screws.

 

 

 

 

Install the 4 hinge hole plugs or screws that were

 

4

 

removed in step 1 into the open screw holes on

 

 

 

the right side of the door opening.

17

Installation Instructions Troubleshooting Tips Consumer Support

Image 17
Contents 134204000 175D1807P417 39-9015311-02 JR DryersOperating Consumer SupportLint Filter in PLACE, Unless the Drying Rack is in USE Hotpoint.comTips Installation When Using Your DryerAbout the control panel About the control settingsInstructions Care and Cleaning of the DryerSorting and Loading Hints Tumble Dry Fabric Care LabelsTools and Materials Required for Dryer Installation Preparing to install your dryerPreparing the Installation Site and Unpacking the Dryer Operating Instructions SafetyDo not USE AN Extension Cord with this Appliance Electrical requirementsElectrical Connection Information for Gas Dryers Exhausting the dryer Additional Installation InstructionsExhaust System Requirements Correct IncorrectExhaust Direction Installing the dryerGas Supply Requirements Tips Consumer SupportDo Not Install the Dryer Consumer Support Troubleshooting TipsInstallation in Recess or Closet Location of Your DryerInstructions Troubleshooting Tips Rough-In DimensionsMobile Home Installation Rear ViewConsumer Support Troubleshooting Tips Electrical Installation for Electric DryersInstructions Operating Instructions Safety Grounding RequirementsInstructions Operating SafetyUse copper Conductors onlyBefore Operating the Dryer Gas Connection for Gas DryersGAS Leaks with AN Open Flame Dryer Must be Level and RestingReversing the Dryer Door Swing Replacement PartsBefore you call for service… Drying times InconsistentClothes take Too long to dryTroubleshooting Tips Safety InstructionsWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Safety Instructions Operating Hotpoint Dryer WarrantyWhat Is Not Covered For The Period We Will ReplaceParts and Accessories Schedule ServiceConsumer Support Hotpoint Website Real Life Design Studio