Installation, Dryer Description | Hotpoint TCYM 80C, TCEM 80C

WATER CONTAINER

You MUST empty the water container after EVERY drying cycle.

Installation

WHERE TO PUT YOUR DRYER

Removing the water container:

Step 1

Pull the water container towards you and remove it completely from the dryer.

Step 2

10 m

15 mm

If you are going to install the dryer under a work counter be sure to leave a 10mm space between the top and any other objects on or above the machine and a 15mm space between the sides and any kitchen units or walls to ensure proper air circulation.

Empty all the water in the water container.

Step 3

Replace the water container making sure that it is securely fixed.

The dryer must never be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to that of the dryer door.

WATER DRAINAGE CONNECTION

If the dryer is installed next to a drain the water can be plumbed into this drain. This does away with the need to empty the water container. The height of the drain must be less than 1m from the bottom of the dryer. Remove the existing hose from the dryer and connect it to the drain (if required add an additional length of hose).

Less than 1m

!Priming the Water Collection System.

When your dryer is new, the water container will not collect water until the system is primed. This will take 1 or 2 drying cycles. Once primed it will collect water during every drying cycle.

CONDENSER UNIT

You MUST clean the fluff from the condenser EVERY month. Failure to clean the condenser could cause premature failure of your dryer.

Remove the condenser unit regularly (at least monthly) and clean off any fluff deposits.

Step 1

Open the condenser cover.

Step 2

Remove the condenser by turning the 3 catches

and pulling the condenser towards you. It is normal for some residual water to be left in the condenser unit.

Step 3

Flush the condenser from the rear with water to remove any fluff deposits.

Step 4

Replace the condenser unit and make sure that all 3 catches are closed and that the position arrows on the front of the condenser are pointing upwards.

ELECTRICAL CONNECTIONS

The socket must be grounded. The power supply cord should be checked periodically and, if required, replaced by a cord specially prepared for this dryer.

BEFORE YOU START USING YOUR DRYER

Once you have installed your dryer and before you use it clean the inside of the drum to remove any dust that could have accumulated during transport.

Dryer Description

Control panel			Empty water
			Empty water
TIMER			Light
Knob	Indicator
	0
			20
			30
			40
130			50
120			60
101	100	80	70
	100	80
HEAT			START
Button			Button

The HEAT button selects drying temperature.

OUT: LOW heat IN: HIGH heat

The TIMER knob sets the drying time: rotate it clockwise, NEVER COUNTER-CLOCKWISE, until the indictor is pointing to the drying time you want to select.

The Empty Water indicator light signals that the water container is full and must be emptied. The light will take a few seconds to go out after replacing the empty water container, the dryer must be running for this to happen.

Note: If the water container fills up the indicator lights, the heat is turned off and your laundry will not dry.

TCEM 80C, TCFM 80C, TCYM 80C specifications

The Hotpoint TCYM 80C, TCFM 80C, and TCEM 80C are part of a reliable lineup of tumble dryers designed to meet a variety of drying needs in modern households. Each model comes with features that enhance performance, convenience, and energy efficiency, making them excellent choices for consumers looking for reliable laundry solutions.

The Hotpoint TCYM 80C is a condenser dryer that offers a 8 kg drying capacity, perfect for families or individuals with higher laundry demands. One of its standout features is the clever moisture sensor that detects when your laundry is dry and stops the cycle, preventing over-drying and protecting your clothes. Its easy-to-use digital display offers various drying programs, including specialized settings for fabrics like wool and delicate items. Additionally, the TCYM 80C comes equipped with a reverse tumble action, which helps to reduce tangling and improve drying efficiency.

The TCFM 80C takes convenience to the next level with a robust design and practical features. Like the TCYM 80C, it also offers an 8 kg capacity and benefits from advanced moisture sensing technology. This model stands out due to its ability to vent outside, making it suitable for homes where a permanent venting solution is feasible. The TCFM 80C also features an anti-allergy program, effectively removing allergens from fabrics, making it an ideal choice for allergy sufferers.

The TCEM 80C is Hotpoint’s heat pump dryer, which utilizes innovative technology to optimize energy consumption. With a similar 8 kg capacity, the TCEM 80C is designed for energy efficiency, operating at lower temperatures while maintaining effective drying performance. It features a sustainable design, making it a perfect choice for environmentally conscious consumers. The heat pump technology not only conserves energy but also protects clothes from excessive heat damage.

All three models incorporate Hotpoint’s durable design principles, ensuring longevity and reliable performance. With user-friendly controls and a variety of drying programs, they cater to different fabric types and preferences. The machines are also equipped with a filter cleaning indicator and easy access to the condenser, simplifying maintenance processes.

In conclusion, the Hotpoint TCYM 80C, TCFM 80C, and TCEM 80C offer diverse features and technologies that cater to a range of drying needs, ensuring that users can find a suitable model whether they prioritize energy efficiency, versatility, or ease of use. Each model is backed by Hotpoint’s commitment to quality and performance, making them worthy investments in modern home laundry care.