Troubleshooting, Laundry | Hotpoint TCEM 80C, TCFM 80C, TCYM 80C

CHOOSING A PROGRAMME

1.Plug the dryer into the electrical socket.

2.Sort your laundry according to fabric type.

3.Open the door and make sure the filter is clean and in place.

4.Load the machine and make sure items are not in the way of the door seal. Close door.

5.Set the temperature with the HEAT button. High heat for Cotton. Low heat for delicates, synthetics and acrylics.

6.Select a drying time by rotating the TIMER knob clockwise.

The tables below show APPROXIMATE drying times in minutes. Weights refer to dry garment weights.

Cottons - High (full) Heat

Drying times 800-1000rpm spin in washing machine

1kg	2kg	3kg	4kg

30-40mins	40-55mins	55-70mins	70-80mins

5kg	6kg	7kg	8kg

80-90mins	95-120mins	120-140mins	130-150mins

Synthetics - Low (gentle) Heat

Drying times on reduced spin in washing machine

1kg	2kg	3kg

40-50mins	50-70mins	70-90mins

Acrylics - Low (gentle) Heat

Drying times on reduced spin in washing machine

1kg	2kg

40-60mins	55-75mins

7.Press the START button to begin.

During the drying programme, you can check on your laundry and take out items that are dry while others continue drying. When you close the door again press the START button in order to resume drying.

8.About 10 minutes before the programme is completed it enters the final COOL TUMBLE phase (fabrics are cooled) which should always be allowed to complete.

9.Open the door and take the laundry out. Clean and replace the filter. Empty and replace the water container.

10.Unplug the dryer.

WASH CARE LABELS

Look at the labels on your garments when tumble drying. The following symbols are the most common.

May be tumble dried

Do NOT tumble dry

Tumble dry at high heat setting

Tumble dry at low heat setting

ITEMS NOT SUITABLE FOR TUMBLE DRYING

1.Articles that contain rubber or rubber-like materials or plastic film, any flammable articles or objects that contain flammable substances.

2.Glass fibres.

3.Items which have been dry cleaned.

4.Large bulky items (quilts, sleeping bags, etc). These expand when drying and prevent airflow through the dryer.

Troubleshooting

Before you call the service centre go through the following troubleshooting suggestions:

PROBLEM:

The dryer won’t start.

POSSIBLE CAUSES/SOLUTION:

•The plug is not in the socket or making contact.

•There has been a power failure.

•The fuse has blown. Try to plug another appliance into the socket.

•You are using an extension cord? Try to plug the dryer directly into the socket.

•The timer knob has not been set properly.

•The start button has not been pressed.

•The door is not closed securely.

Laundry

MAX LOAD SIZE

Do not load more than maximum capacity. These numbers refer to dry weight:

Natural fibres: 8kg max

Synthetic fibre: 3kg max

PROBLEM:

It is taking a long time to dry.

POSSIBLE CAUSES/SOLUTION:

•The filter has not been cleaned.

•The water container needs emptying? The empty water light is on?

•The condenser needs cleaning.

•The temperature setting is not correct.

•The correct time has not been selected.

•The air intake grill is obstructed.

•The items were too wet.

•The dryer was over loaded.

TCEM 80C, TCFM 80C, TCYM 80C specifications

The Hotpoint TCYM 80C, TCFM 80C, and TCEM 80C are part of a reliable lineup of tumble dryers designed to meet a variety of drying needs in modern households. Each model comes with features that enhance performance, convenience, and energy efficiency, making them excellent choices for consumers looking for reliable laundry solutions.

The Hotpoint TCYM 80C is a condenser dryer that offers a 8 kg drying capacity, perfect for families or individuals with higher laundry demands. One of its standout features is the clever moisture sensor that detects when your laundry is dry and stops the cycle, preventing over-drying and protecting your clothes. Its easy-to-use digital display offers various drying programs, including specialized settings for fabrics like wool and delicate items. Additionally, the TCYM 80C comes equipped with a reverse tumble action, which helps to reduce tangling and improve drying efficiency.

The TCFM 80C takes convenience to the next level with a robust design and practical features. Like the TCYM 80C, it also offers an 8 kg capacity and benefits from advanced moisture sensing technology. This model stands out due to its ability to vent outside, making it suitable for homes where a permanent venting solution is feasible. The TCFM 80C also features an anti-allergy program, effectively removing allergens from fabrics, making it an ideal choice for allergy sufferers.

The TCEM 80C is Hotpoint’s heat pump dryer, which utilizes innovative technology to optimize energy consumption. With a similar 8 kg capacity, the TCEM 80C is designed for energy efficiency, operating at lower temperatures while maintaining effective drying performance. It features a sustainable design, making it a perfect choice for environmentally conscious consumers. The heat pump technology not only conserves energy but also protects clothes from excessive heat damage.

All three models incorporate Hotpoint’s durable design principles, ensuring longevity and reliable performance. With user-friendly controls and a variety of drying programs, they cater to different fabric types and preferences. The machines are also equipped with a filter cleaning indicator and easy access to the condenser, simplifying maintenance processes.

In conclusion, the Hotpoint TCYM 80C, TCFM 80C, and TCEM 80C offer diverse features and technologies that cater to a range of drying needs, ensuring that users can find a suitable model whether they prioritize energy efficiency, versatility, or ease of use. Each model is backed by Hotpoint’s commitment to quality and performance, making them worthy investments in modern home laundry care.