The Control Panel
1000
1
EW 1013 I
2 | 3 4 5 | 6 | 7 |
1 Detergent dispenser drawer
The programme chart is in the interior part of the drawer.
2 MAINS-ON light
This light illuminates when the machine starts working and goes out when the “ON/OFF” button is released.
3 “ON-OFF” button
By depressing this button the machine starts operating. When depressed again, the machine stops.
The push button is provided with a
5 “RINSE HOLD” button
Press this button to make the machine stop with water in the drum after the cotton, synthetic/mixed fabrics, wool or delicate wash cycles.
This prevents any creasing which may take place if the clothes are left damp in the drum. When it is convenient for you to empty the machine, simply press this button again so that the machine can proceed to drain and spin, or select the drain programme "P".
If this button is not activated, the washing programmes will end with a spin.
6 “HALF LOAD” button
Select this button to reduce water consumption on the rinse cycle when washing a smaller load of cottons or linens (maximum load size = 2.5 kg).
4 “QUICK WASH” button
By depressing this button on programmes “A, B, C and D” (Cottons - Linens) and “G” (Synthetics and Mixed fabrics) the wash time is reduced.
This is suitable only for garments which are lightly soiled.
7 Programme selector dial
Push the dial to pop it out. Turn the dial clockwise to select the required wash programme.
Before setting the dial to any position the machine must be switched off by depressing the “ON/OFF” button again.
6