Electrolux EW 1013 I manual Start the programme, At the end of the programme

Page 8

6. Start the programme

Before starting up the machine check that:

●the appliance is plugged in

●the water supply tap is turned on

●the drain hose is correctly and securely positioned

●the door and the detergent dispenser drawer are closed.

Depress the ON-OFF button: the mains-on light will illuminate and the machine starts operating.

The door is controlled by a safety device which releases 2 minutes after the end of the programme.

Switch the machine off by depressing the ON-OFF button again. The mains-on light goes out.

Remove the laundry from the drum and carefully check that the drum is empty.

If you do not intend to carry out another wash, close the water tap. Leave the door open to prevent the formation of mildew and unpleasant smells.

P0471S

7. At the end of the programme

The machine stops automatically.

If the RINSE HOLD option has been selected, the machine will stop with the water left in the tub, to prevent the fabric from creasing.

To drain only, select the drain programme “P”.

To drain and spin, depress the RINSE HOLD button again.

8

Image 8

Contents Instruction Booklet Use InstallationChild Safety Contents Interest Environment Your New Washing MachineEcological hints Detergent dispenser drawer Child safety feature Description of the Appliance Control Panel Operating Sequence To drain and spin, depress the Rinse Hold button again Start the programmeAt the end of the programme Select the required programme At the end of the programme Washing Hints 1000g = 1 kgWhich detergent? Which form?Wash Care Symbols Important NotesWashing Programmes Load Washing symbol Type of laundryWash programme Degree of soil Programme Description Maintenance and Cleaning Cleaning the water inlet filter Emergency emptying outSomething Not Working Service & Spare Parts Symptom Possible causes0870 5 Customer CareGuarantee Conditions Standard guarantee conditionsEuropean guarantee This guarantee does not coverInstallation Instructions Technical SpecificationsPositioning Installation on a Suspended FloorUnpacking Water inlet Water drainageAppliance must be connected to a cold water supply Into a drainage standpipeLevelling Special conditionsInterest of the environment Onto a sink outlet spigotElectrical connection Permanent connectionPreparation and assembly of the door Building-inDrill four fixing holes see Fig. G